4 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP 900. This panel allow you to add additional switches for lights and accessories. Made in the USA!

50 Caliber Racing Custom CNC Billet Aluminum Grill for 2019 RZR XP1000, XP Turbo, Turbo S

Add a unique look and increased air flow to your RZR with our custom CNC aluminum grill. This grill transforms the look of your RZR drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.

Be sure to select color before ordering!

Bed Mount Clamp on Spare Tire Carrier Mount for Can-Am X3

A spare tire is essential, especially when you are off road. This high strength welded steel mount bolts directly to the bed on your 2 or 4 seat Can-Am X3. 100% made in the USA. Available in two designs: one which will fit up to a 32" inch wheel, and a modified design which will fit a 35" tire.

Be sure to choose correct mount for your tire size before ordering!

2 Inch LED Pod Light with Multi-colored Covers

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury.

4 x 110mm - 10x1.25 Stud Wheel Spacer - 2" Thick Yamaha Rhino

CNC milled using high quality aerospace aluminum for durability and fit. Self centering design. These spacers are a great solution for clearance problems when using aftermarket wheels.They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit. Price is for a single wheel spacer.

50 Caliber Racing - 5 x 5.5 Inch (5 x 139.7 metric) Wheel Spacer

- Will fit most vehicles with 5 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"This Switch Turns Something On"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

OEM Replacement Belt for your XP Turbo 2017-2018+, Best of the Best when it comes to a belt for your Polaris RZR!

Heavy Duty Radius Rod Kit for Can-Am Maverick X3 (fits 2 & 4 seat models)

Stock rods do not hold up to aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and wallowed out frame tabs. Completely solve this problem with 1.25" CNC rods and 5/8"chromoly heim joints. Available in raw or powdercoat finish.

Be sure to select the correct size  & finish before ordering!

Stage 1 88cc Big Bore kit for 88-99 Z50, 2000-2020 xr and crf 50's

- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.

Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Left Hand Thread in 1/2" up to 7/8"

Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 

Split Collar Tube Clamp 1.5" I.D. - for Fabricating Bolt-on Accessories

50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.

* Price is for one clamp

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Zombie Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing Custom CNC Billet Aluminum Grille for 2020+ RZR PRO XP 2 and 4 seat models

Add a unique look to your RZR with our custom CNC aluminum grill. This grill transforms the look of your RZR drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.

Be sure to select color before ordering!

50 Caliber Racing Custom CNC Billet Aluminum Grille for 2017+ Can Am X3 2 and 4 seat models

Add a unique look to your X3 with our custom CNC aluminum grill. This grill transforms the look of your Can-Am drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.

Be sure to select color before ordering!

**Does NOT fit Ride Command Dash. 2017 Polaris Ride Command Dash Panels will be available by May 1 2017**

Custom 6 piece CNC Billet Aluminum Dash panel for your Polaris Interactive Digital Display (GPS) equipped RZR XP 1000, S900, 900 Trail and 900 XC. (2015-up)

Complete Kit includes all 6 dash plates

Available in several colors, be sure to make your selection above before ordering.

50 Caliber Racing 40 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

Price is for 1 single wheel spacer

50 Caliber 2 inch wheel spacer 4x156mm with 12x1.5 studs

- 6061 Billet Aluminum
- 2 inch thick
- nuts to mount spacer to vehicle included
- Easy installation
- Fits Polaris 2013+ ranger, 2015 S900 and all xp1000's

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!