Best sellers

Active filters

  • Availability: In stock
  • Categories: ATV Parts & Performance
  • Categories: Automotive
  • Wheel Spacer 8x170mm 14x2mm Studs

    Price $48.00

    50 Caliber Racing - 8x170mm Wheel Spacer

    - Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
    - Available in 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • Wheel Spacer 8x6.5 Inch 9/16" studs

    Price $50.00

    50 Caliber Racing - 8x6.5 Inch (8 x 165.1 metric) Wheel Spacer

    - Will fit most vehicles with 8x6.5" bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • Illuminated On/Off Rocker Switch Rock Lights with Jeep

    Price $21.99

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Jeep

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • Yamaha Rhino Grizzly 660 CDI

    Price $119.99

    50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

    Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

     

  • Polaris Scrambler 500 Rear Brake Caliper

    Price $64.99

    Polaris Scrambler 500 Rear Brake Caliper with Pads

    50 Caliber Racing Rear Brake Caliper assembly for the 1998-2004 Polaris Scrambler 500 2x4, 4x4 ATV. It comes fully assembled including Pads to replace the factory Brake Caliper for your Scrambler with direct replacement for Polaris Part numbers listed.

  • Tie Rod End Kit Yamaha YFM350 ATV

    Price $25.00

    Tie Rod End Kit for Yamaha ATVs

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

  • Carburetor for Suzuki LT80 Quadsport ATV

    Price $44.99

    Carburetor for Suzuki LT80 Quadsport ATV

    50 Caliber Racing Carburetor for the Suzuki Quadsport LT80. Why bother with trying to rebuild your old Carb when you could buy a replacement to upgrade your ATV saving you time and money... you'll be back to riding in no time!

    • On sale!

    Tie Rod End Kit Yamaha Raptor YFM660 ATV

    Price $14.50

    Tie Rod End Kit for Yamaha Raptor YFM660 ATVs

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

  • Wheel Spacer 6 x 5.5 Inch 14mm Stud

    Price $28.00

    50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 14mm Studs

    - Will fit most 88 - Up GM vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • Tie Rod End Kit Polaris Sportsman ATV

    Price $25.00

    Tie Rod End Kit for Polaris Sportsman ATVs

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

  • 12 Way Standard LED Circuit Screw Fuse Block

    Price $31.99

    12 Way Standard LED Circuit Screw Fuse Block with Ground Terminals

    This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

  • Universal Dash Switch Panel

    Price $0.00

    Custom CNC Billet Aluminum OR Black 4 Switch Dash Panel Only

    Looking for a place to add dash switches to your car, truck, SUV, or Side by Side ? Our custom dash panel gives you 4 additional full size switch locations . Available with powder coat finish or raw aluminum. Made in the USA!

  • Uniball Spherical Bearings - .5" to 1.5" Bore

    Price $39.99

    50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

    Be sure to choose bearing size before ordering!

  • Illuminated On/Off Rocker Switch Rock Lights with...

    Price $21.99

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Sexy Girl

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • 12 Way Fuse Block - Blade Terminals - LED Indicators

    Price $24.99

    Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories

    Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
    Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

  • Honda TRX XR400R 440cc Big Bore Kit

    Price $129.99

    440cc Big Bore Kit with 89mm Piston for Honda XR400R / TRX400EX 1996- 2016

    Bolt on 89mm 440cc Big Bore Kit for all Honda TRX400ex and XR400 models. This is a complete kit, with everything you need to rebuild your top end.

  • Wet Clutch Assembly - Grizzly 660

    Price $110.00

    Wet Clutch Assembly for Yamaha Rhino and Grizzly 660

    Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.

    Fits the following Yamaha models:
    - Rhino YXR 660 (2004-2007)
    - Grizzly YFM 660 (2002-2008)

  • Wheel Spacer 6 x 135mm - 14x2.0 Lugs

    Price $30.25

    50 Caliber Racing - 6 x 135mm  Wheel Spacer - Ford 6 Lug 1999-2014

    - Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths
    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • Tie Rod End Kit Suzuki LT250

    Price $21.00

    Tie Rod End Kit for Suzuki LT250 ATV

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.