Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

440cc Big Bore Kit with 89mm Piston for Honda XR400R / TRX400EX 1996- 2016

Bolt on 89mm 440cc Big Bore Kit for all Honda TRX400ex and XR400 models. This is a complete kit, with everything you need to rebuild your top end.

Wet Clutch Assembly for Yamaha Rhino and Grizzly 660

Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.

Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)

Tie Rod End Kit for Suzuki LT250 ATV

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Universal 6 Way Covered 12V Screw Fuse Box Block with Ground Terminals

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.

Be sure to choose correct size before ordering!

Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

This pair of 50 Caliber Racing LED lighted whips are super bright and fully adjustable with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal Flag and swivel clip mounts. Available in 2, 4 and 6 foot lengths.

Be sure to choose length when ordering!

Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes two Left and two Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Universal 10 Way Covered 12V Circuit Ring Terminal Fuse Box Block with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

50 Caliber Racing Brake Pads for the Polaris Sportsman ATV are factory spec semi-metallic pads with Kevlar fibers. Made to perfrom in all terrain conditions, our pads have a higher resistance to heat and other elements making them suitable for general or utility use.

Will fit Raptor, Banshee, Blaster and Warrior. Brand new with 1 Year Warranty, 50 Caliber Racing dual piston Rear Brake Caliper assembly for your Yamaha ATV. Includes billet parking brake block off plate which is removeable in order to maintain the use of your existing parking brake. Comes with new Pads, mounting bracket and assembly hardware shown.

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "420 Leaf"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing LED lighted whips are super bright and fully adjustable, with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal flag and and swivel clip mounts. Add safety and visibility to your UTV, truck, Jeep, sand rail and more! Available in 4 and 6 foot lengths.

Be sure to choose length when ordering!

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!