6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

4 x 110mm - 10x1.25 Stud Wheel Spacer - 1" Thick - Yamaha Rhino

CNC milled using high quality aerospace aluminum for durability and fit. These spacers are a great solution for clearance problems when using aftermarket wheels.They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit.

Price is for a single wheel spacer. Select the quantity you need.

High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.

Be sure to choose the correct size and quantity before ordering!

Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"

Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 

A-Pillar Pod Light Mount Brackets for Polaris RZR

A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black. Fits all RZR models, 2008 - current.

3 Inch LED Pod Light - 50 Caliber Racing

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

**Does NOT fit Ride Command Dash. 2017 Polaris Ride Command Dash Panels will be available by May 1 2017**

Custom 6 piece CNC Billet Aluminum Dash panel for your Polaris Interactive Digital Display (GPS) equipped RZR XP 1000, S900, 900 Trail and 900 XC. (2015-up)

Complete Kit includes all 6 dash plates and 4 additional rocker switches
Available in several colors, be sure to make your selection above before ordering.

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"This Switch Turns Something On"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

Split Collar Tube Clamp for 1.875" O.D. Round Tubing - for Fabricating Bolt-on Accessories - Fits Can-AM X3 Roll Cage

50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Designed to give a rock solid base to build accessories off of. Just what you need for fabricating bolt-on parts like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.

* Price is for one clamp

RH Flanged Threaded Through Weld In Bung - 1.25" .095 Round with 1/2" x 20 Threads

Fits in 1.25" .095 tubing

Thread: 1/2" x 20
Overall Length: 1"
Flange Diameter: 1.25"

Mild Steel Material

50 Caliber 1 inch wheel spacers 4x137mm with 10x1.25 pitch stud

- 6061 Billet Aluminum
- 1 inch thick
- Lifetime warranty
- Flat profile nuts to mount spacer to vehicle included
- Easy installation
- Fits Can-am Commander, Maverick and all 4x137 patterns using 10x1.25 pitch studs

Price is per spacer

50 Caliber Racing 50 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

50 Caliber Racing 30 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages

Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.

Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

Be sure to select harness color before ordering!

This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.

*When ordering please select if you want to included Switches.

Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R

Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!

Please select color and dash kit options before ordering!

50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000

Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

Be sure to specify finish before ordering!

Can-Am X3 Bump Seat with Harness

50 Caliber Racing Bump Seat for the Can-Am X3 is the perfect upgrade to get the entire family having fun together! This seat is made to be mounted in the middle front between driver and passenger or in the back between the rear stock seats.