Active filters
50 Caliber Racing 52mm Head Gasket Kit for 110cc and 125cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
Out of stock and discontinued
Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Stroker Kit 1
Ready for more power? Convert your 88cc Race Head kit into a 108cc stroked out beast!! (Much more powerful than any of the chinese engines up to 125cc)
50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering!
Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
DISCONTINUED
These forks are oil filled and have 5 1/2 inches of travel. Forks come fully assembled. You can use your stock wheel and brake with these forks. Kit includes fork legs, tripples clamps, extended brake cable, and all hardware needed for installation. Fits crf and xr50s.
This kit is the complete kit to convert your stock motor into a powerful open class 117cc engine!
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
50 Caliber Racing Tall Seat for Honda XR50 & CRF50 Pit Bikes
Bolt on upgrade for your Honda 50. This seat will raise the seated position higher for taller riders or longer legs. The seats have a nice firmness to them and a mild grip cover. Comes complete with foam and cover.
Fits the following Honda pit bikes:
- Honda XR50 (1992-2003)
- Honda CRF50 (2004-2018)
50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look.
Be sure to choose kit size before ordering!
50 Caliber Racing Replacement Gas Tank for Honda XR70 & CRF70 Pit Bikes
Brand new gas tank for your Honda 70 pit bike. Includes cap and a new petcock valve. Don't waste your time messing around with gluing your cracked, leaking, dirty tank together. Just bolt a new one one, fill it up and ride!
LED or 4" HID light mounting Brackets for Jeep Wrangler 2007-2016
2 Honda CRF & XR 50 Aluminum Rims with Heavy Duty Spoke kits
A Pair (2) of high quality 6061 Aluminum Pit Bike Rims with 28 Spoke holes. Spokes are included. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits Honda CRF and XR 50 Pit Bikes.
Red Billet aluminum chain guide for your Honda 50 pitbike. This chain guide will fit many different applications besides honda 50s. It will also fit almost every Chinese pitbike on the market.
