2 Inch LED Pod Light with Multi-colored Covers

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury.

4 x 110mm - 10x1.25 Stud Wheel Spacer - 2" Thick Yamaha Rhino

CNC milled using high quality aerospace aluminum for durability and fit. Self centering design. These spacers are a great solution for clearance problems when using aftermarket wheels.They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit. Price is for a single wheel spacer.

50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!

50 Caliber Racing - 5 x 5.5 Inch (5 x 139.7 metric) Wheel Spacer

- Will fit most vehicles with 5 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Whip Light"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

Heavy Duty Radius Rod Kit for Can-Am Maverick X3 (fits 2 & 4 seat models)

Stock rods do not hold up to aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and wallowed out frame tabs. Completely solve this problem with 1.25" CNC rods and 5/8"chromoly heim joints. Available in raw or powdercoat finish.

Be sure to select the correct size  & finish before ordering!

Split Collar Tube Clamp 1.5" I.D. - for Fabricating Bolt-on Accessories

50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.

* Price is for one clamp

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Zombie Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing Carbon Fiber Look Bucket Seat for Polaris RZR XP1000

Featuring a supportive tubular metal frame, thick bolsters, and 4 point harness pass through holes. Upholstered in black vinyl with awesome carbon fiber look inserts and an embroidered logo. Removable bottom cushion for easy cleaning. Some modifications may be required for installation.

Price is for one seat

50 Caliber Racing Custom CNC Billet Aluminum Grille for 2020+ RZR PRO XP 2 and 4 seat models

Add a unique look to your RZR with our custom CNC aluminum grill. This grill transforms the look of your RZR drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.

Be sure to select color before ordering!

50 Caliber Racing 40 inch LED Light Bar

Massive, reliable 12 volt LED lighting at a great price. Featuring 3 watt Cree bulbs and an IP68 waterproof housing. Just what you need for any kind of off road or industrial application.

- UTV and Off Road
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles

50 Caliber Racing Custom CNC Billet Aluminum Grille for 2017+ Can Am X3 2 and 4 seat models

Add a unique look to your X3 with our custom CNC aluminum grill. This grill transforms the look of your Can-Am drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.

Be sure to select color before ordering!

**Does NOT fit Ride Command Dash. 2017 Polaris Ride Command Dash Panels will be available by May 1 2017**

Custom 6 piece CNC Billet Aluminum Dash panel for your Polaris Interactive Digital Display (GPS) equipped RZR XP 1000, S900, 900 Trail and 900 XC. (2015-up)

Complete Kit includes all 6 dash plates

Available in several colors, be sure to make your selection above before ordering.

50 Caliber Racing 40 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

50 Caliber Racing 50 inch LED Light Bar

Massive, reliable 12 volt LED lighting at a great price. Featuring 3 watt Cree bulbs and an IP68 waterproof housing. Just what you need for any kind of off road or industrial application.

- UTV and Off Road
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"This Switch Turns Something On"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

4 x 110mm - 10x1.25 Stud Wheel Spacer - 1" Thick - Yamaha Rhino

CNC milled using high quality aerospace aluminum for durability and fit. These spacers are a great solution for clearance problems when using aftermarket wheels.They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit.

Price is for a single wheel spacer. Select the quantity you need.

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Roof Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.

Be sure to choose the correct size and quantity before ordering!