Best sellers

Active filters

  • Categories: Automotive
  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Wheel Spacer 6 x 5.5 Inch 12mm Stud

    Price $22.00

    50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs

    - Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

    • Out-of-Stock

    50 Caliber Performance Pipe

    Price $0.00

    50 Caliber Racing Performance Pipe. This pipe will add horse power and give your 50 a great sound. Header tube is 1" inside diameter all the way to the muffler. Pipe will bolt right up to the stock mounts on header and the rear of the frame. Muffler is solid aluminum and comes polished, red, or black. Fits crf and xr50s.

    DISCONTINUED

    • Out-of-Stock

    4 Link Rod End Kit - 3/4" Chromoly Heim - 1.75" OD...

    Price $179.99

    50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • Left Hand 1"- 1 3/4" Weld In Bungs

    Price $9.99

    50 Caliber Racing Steel Weld In Bung.


    Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

    Be sure to select the quantity before ordering!

  • 88cc stage 2 big bore kit for honda xr70 and crf 70

    Price $279.99

    Stage 2 88cc Big Bore kit for Honda xr70 and crf70 all years

    - 20mm Carburetor kit

    - Performance camshaft
    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (you can still run pump gas)
    - Head gasket kit

  • 14x1.5mm Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $88.99

    Solid Steel Extended Spike Lug Nuts - 14x1.5mm Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!

  • Carbon Fiber Billet Twist Throttle

    Price $26.99

    Carbon Fiber 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50 Handle Bars. We have 5 different colors to choose from.

  • Chromoly Heim Joints 1/2" - 7/8" RHT MALE

    Price $15.99

    Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"


    Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

     

    Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 

  • 12 Way Standard LED Circuit Screw Fuse Block

    Price $24.99

    12 Way Standard LED Circuit Screw Fuse Block

    This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

  • 2 inch LED Pod Light

    Price $29.99

    2 Inch LED Pod Light - 50 Caliber Racing

    50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

  • 9/16 Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $88.99

    Solid Steel Extended Spike Lug Nuts - 9/16"-18 Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!

  • Tube Clamp 11/16" Wide for 1.75" OD Roll Bar

    Price $27.99

    Split Collar Tube Clamp 11/16" Wide 1.75" I.D. - for Fabricating Bolt-on Accessories

    Tube clamp for adding on after thought accessories, weldable steel split collar tube clamp. CNC machined for accurate fit with protective oil coating that can be directly welded on. 

    * Price is for one clamp

  • 3.5 Inch Spike Lug Nut Singles

    Price $5.75

    Solid Steel 3.5 Inch Extended Spike Lug Nut - Singles

    Heat treated, hardened steel lug nuts with 3.5" extended spikes for your ATV or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels. Requires extra long socket key for installation/removal. Available in several thread sizes and colors. Price is for one lug nut.

    Be sure to choose thread size, color and quantity before ordering!

    • On sale!

    12v 6 Piece Fuse power block aka power panel

    Price $20.99

    6 Way Standard LED Circuit Blade Fuse Box aka Power block

    This power block is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.