Best sellers

Active filters

  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • Custom Billet Grill RZR XP1000 / XP Turbo / S 2019

    Price $159.99

    50 Caliber Racing Custom CNC Billet Aluminum Grill for 2019 RZR XP1000, XP Turbo, Turbo S

    Add a unique look and increased air flow to your RZR with our custom CNC aluminum grill. This grill transforms the look of your RZR drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.


    Be sure to select color before ordering!

  • 2" 5 point Harness Seat Belt 50 Caliber Racing

    Price $119.99

    50 Caliber Racing 2" 5 Point Safety Harness

    - 2" wide straps
    - Sewn in pads for maximum comfort
    - Latch lock system with quick release pull strap
    - Adjustable straps to fit almost anyone
    - 5 Point - Includes crotch strap

    Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs.

  • Split Collar Tube Clamp 1.5" I.D.

    Price $29.99

    Split Collar Tube Clamp 1.5" I.D. - for Fabricating Bolt-on Accessories

    50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.

    * Price is for one clamp

  • 88cc stage 1 big bore kit for honda Z50, xr50 and crf50

    Price $155.00

    Stage 1 88cc Big Bore kit for 88-99 Z50, 2000-2020 xr and crf 50's

    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (can still run pump gas)
    - Head gasket kit includes all gasket needed to install bore kit.

    • On sale!

    Can-Am Maverick X3 Heavy Duty Radius Rods

    Price $439.99

    Heavy Duty Radius Rod Kit for Can-Am Maverick X3 (fits 2 & 4 seat models)

    Stock rods do not hold up to aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and wallowed out frame tabs. Completely solve this problem with 1.25" CNC rods and 5/8"chromoly heim joints. Available in raw or powdercoat finish.

    Be sure to select the correct size  & finish before ordering!

    • On sale!
    • Out-of-Stock

    XP1000 Bucket Seat with Carbon Fiber Look

    Price $399.99

    50 Caliber Racing Carbon Fiber Look Bucket Seat for Polaris RZR XP1000


    Featuring a supportive tubular metal frame, thick bolsters, and 4 point harness pass through holes. Upholstered in black vinyl with awesome carbon fiber look inserts and an embroidered logo. Removable bottom cushion for easy cleaning. Some modifications may be required for installation.

    Price is for one seat

  • Custom Billet Grille RZR PRO XP 2 and 4 seat

    Price $169.99

    50 Caliber Racing Custom CNC Billet Aluminum Grille for 2020+ RZR PRO XP 2 and 4 seat models

    Add a unique look to your RZR with our custom CNC aluminum grill. This grill transforms the look of your RZR drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.


    Be sure to select color before ordering!

    • Out-of-Stock

    40 inch LED Light Bar

    Price $145.00

    50 Caliber Racing 40 inch LED Light Bar

    Massive, reliable 12 volt LED lighting at a great price. Featuring 3 watt Cree bulbs and an IP68 waterproof housing. Just what you need for any kind of off road or industrial application.

    - UTV and Off Road
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response Vehicles

  • High Quality 20mm Carburetor for Honda 50 Big bore...

    Price $60.00

    Premium Grade 20mm Performance Aftermarket Carburetor for Honda 50 Pit Bikes with 88cc Big Bore Engines!

    Intake throat diameter: 20mm
    Bolt hole spacing: 48mm
    Air filter mount diameter: 32mm

    Fits:
    - Honda 50 XR50 CRF50 XR70 CRF70 (Sized for 88cc - up Big Bore modified engine. Not recommened for stock engines)

  • Custom Billet Grille Can Am X3 2 and 4 seat models

    Price $154.99

    50 Caliber Racing Custom CNC Billet Aluminum Grille for 2017+ Can Am X3 2 and 4 seat models

    Add a unique look to your X3 with our custom CNC aluminum grill. This grill transforms the look of your Can-Am drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.


    Be sure to select color before ordering!

  • RZR Dash Panel Digital GPS 6 piece

    Price $0.00

    **Does NOT fit Ride Command Dash. 2017 Polaris Ride Command Dash Panels will be available by May 1 2017**

    Custom 6 piece CNC Billet Aluminum Dash panel for your Polaris Interactive Digital Display (GPS) equipped RZR XP 1000, S900, 900 Trail and 900 XC. (2015-up)

    Complete Kit includes all 6 dash plates

    Available in several colors, be sure to make your selection above before ordering.

  • Light Bar LED Radius (Curved) 40in

    Price $179.99

    50 Caliber Racing 40 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response

    • Out-of-Stock

    50 inch LED Light Bar

    Price $169.99

    50 Caliber Racing 50 inch LED Light Bar

    Massive, reliable 12 volt LED lighting at a great price. Featuring 3 watt Cree bulbs and an IP68 waterproof housing. Just what you need for any kind of off road or industrial application.

    - UTV and Off Road
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response Vehicles

  • XP 1000 6 Switch Dash Panel (Only) Black

    Price $159.99

    6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!


    • Out-of-Stock

    Oversized Foot Pegs

    Price $0.00

    Oversized Foot Pegs for Honda Pit Bikes


    One pair of Oversized Foot Pegs for all Honda pit bikes and all Chinese knock offs. Includes both right and left pegs. Oversized larger foot platform and solid aluminum for lightweight strength, offering better stability and more room for larger riders. Anodized finish in 3 different colors with a 50 Caliber Racing logo on the side.

  • Pit Bike Rims 12 Inch 32 Hole

    Price $0.00

    50 Caliber Racing Pit Bike 12 inch Rims - 32 Hole

    High quality 6061 Aluminum Pit Bike Rims with 32 spoke holes. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits CRF and XR 50 Pit Bikes, and anything else that requires a 12 inch wheel with 32 spokes.

  • 4x110 Wheel Spacer 1" 10x1.25mm Stud

    Price $24.99

    4 x 110mm - 10x1.25 Stud Wheel Spacer - 1" Thick - Yamaha Rhino

    CNC milled using high quality aerospace aluminum for durability and fit. These spacers are a great solution for clearance problems when using aftermarket wheels.They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit.

    Price is for a single wheel spacer. Select the quantity you need.

  • High Angle Misalignment Spacers for Heim Joints

    Price $18.99

    High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.

    Be sure to choose the correct size and quantity before ordering!

    • Out-of-Stock

    Yamaha PW50 Big Bore 60cc Top End Kit

    Price $79.99

    Yamaha PW50 60cc Big Bore Kit 1979-2009 (top end cylinder kit)
    DISCONTINUED
    Bolt on 60cc Big Bore Kit for Yamaha PW50 and QT50 Pit Bikes. This is a complete top end cylinder kit ready to install out of the box. Breathe new life into your kid's bike with our high quality, affordable and reliable big bore kit!