50 Caliber Racing replacement gas tank for Honda CRF50
Brand new fuel tank for your pit bike. Includes cap and a new petcock valve. Don't waste your time messing around with gluing your cracked, leaking, dirty tank together. Just bolt a new one one, fill it up and ride!
Chinese spokes - Fits 1 - 10" wheel. Works on most Chinese pit bike models.
High Flow Aluminum Body Inline Fuel Filter with 1/4" Flanges
Vintage Stage 1 88cc Big Bore kit (52mm bore)
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.
50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Be sure to choose bearing size before ordering!
50 Caliber Racing Gas Tank for Yamaha PW80 Pit Bikes All Years
Jet Kit for 20mm carb jets included 82/85/87/90/92/95
We now offer our own brand Jet Kit! Put the following reference number in the search bar: [4211A1]
50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
50 Caliber Racing Pit Bike 10 inch Rim for Honda CRF & XR 50
High quality 6061 Aluminum Pit Bike Rims with 28 spoke holes. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits Honda CRF and XR 50 motorcycles
Stock Replacement Handle Bars for Honda CT70 KO, Z50, K1 & k2 through 1978
50 Caliber Racing Extended Forks - 2" Taller than stock for Honda XR50 and CRF50 Pit Bikes
One set of 50 Caliber Racing extended forks. 2 Inches taller than stock height with stock spring rate. Black finish for a stealth, custom look. Fix your kids bike the easy way. Installation is quick and easy, and requires no modifications.
50 Caliber Racing rod end fabrication kit. 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1.25" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
15mm Stock Replacement Honda 50 Carburetor
Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.
20mm Carburetor for 88cc big bore engine on Honda 50's. This will also fit many pitbikes up to 125cc.
DISCONTINUED
Fits Honda xr50 and crf50 and many chinese Pit Bikes
This is our new 3+ swingarm. We call it the big bike swingarm because thats what will have after you add this. Rides incredible compared to stock style swingarms and delivers 9 inches of wheel travel. This is the biggest bang for the buck when it comes to swingarms for your 50.
Honda Trail Bikes Heavy Duty Auto Clutch kit. This clutch is a great improvement to your stock clutch. We recommend this kit with any upgraded/big bore motor. The stock clutch is designed for a stock motor and that's that. If you want reliablilty and power this is a must have performance upgrade. Fits 1992 to current year models. z50, xr50, and crf50
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering!
