Active filters
50 Caliber Racing - 8x170mm Wheel Spacer
- Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
- Available in 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
50 Caliber Racing's Elite Series 4 Point Harness seat belt with black hardware and push button release
- Available in 2" and 3" wide straps- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many designs and colors available: Sugar skulls red and black, Bandana red, black, blue
Available as harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.
50 Caliber Racing - 8x6.5 Inch (8 x 165.1 metric) Wheel Spacer
- Will fit most vehicles with 8x6.5" bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Jeep
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "LED Light Bar"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Polaris Scrambler 500 Rear Brake Caliper with Pads
50 Caliber Racing Rear Brake Caliper assembly for the 1998-2004 Polaris Scrambler 500 2x4, 4x4 ATV. It comes fully assembled including Pads to replace the factory Brake Caliper for your Scrambler with direct replacement for Polaris Part numbers listed.
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Sexy Girl
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Tie Rod End Kit for Yamaha ATVs
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
Replacement 27mm Carburetor for Honda Fourtrax Recon TRX250
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing Momentary Rocker Switch laser etched design "Horn"
High quality 50 Caliber Racing Illuminated Momentary Horn Rocker Switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Tie Rod End Kit for Yamaha Raptor YFM660 ATVs
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
12 Way Standard LED Circuit Screw Fuse Block with Ground Terminals
This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.
50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 14mm Studs
- Will fit most 88 - Up GM vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
Billet Aluminum CNC Roll Cage/Bumper End Caps fits 1.75" tubing .095
