50 Caliber Racing Steel Weld In Bung.

Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

Be sure to select the quantity before ordering!

50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019

Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to choose finish before ordering!

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

50 Caliber Racing On/On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.

Polaris General Bump Seat with Harness (4 seat model)

50 Caliber Racing Bump Seat for the Polaris General is the perfect upgrade to get the entire family having fun together! This seat is made to be mounted in the rear of the vehicle between the 2 rear seats. 

12 Way Standard LED Circuit Screw Fuse Block

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Heavy Duty Radius Rod Kit for RZR XP Turbo (fits both 2 and 4 seat models)

Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 5/8" chromoly heim joints. This setup is bulletproof. Available in raw or powdercoat finish.

Be sure to specify your RZR year & desired finish before ordering!

5 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP 900. This panel allows you to add additional switches for lights and accessories. Made in the USA!

2 Inch LED Pod Light - 50 Caliber Racing

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

50" Radius LED Light Bar Mounting Brackets for 2010-2013 Can Am Maverick / Commander

Clamp on brackets allow you to brow mount a 50" Curved LED light bar on your Can-am Maverick or Commander. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.

Patented Design

DISCONTINUED

- 12x8 Beadlock Wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs

50 Caliber Racing Brake Rotors with Lifetime Warranty for the XP1000 is the performance upgrade you need over replacement stock rotors to give your RZR more reliable stopping power. 

Polaris RZR XP1000 Bump Seat with Harness

50 Caliber Racing Bump Seat for the Polaris RZR is the performance and safety upgrade you need that will add a 3rd seat perfect for kids 60 lbs or less! This seat is made to be mounted in the middle front between driver and passenger or in the back between the rear stock seats.

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Rear Lights"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

DISCONTINUED

- 12x10 Beadlock Wheel
- 4x156mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs

Illuminated 50 Caliber Racing Dual USB Rocker Switch - USB Type A

High quality 50 Caliber Racing backlit dual USB rocker switch allows you to charge you iPod, cell phone and other mobile devices. Operates on 12-24 Volts and outputs 5V at 3.1 Amps. Waterproof, durable switches are perfect for your boat car truck sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Show Me Your ..."

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

This is the complete kit that includes all 3 panels and 4 additional rocker switches

50 Caliber Racing Quick Release Fire Extinguisher Mount . Two piece design with stainless hardware and multiple points of contact for rattle free reliable performance. Stainless catch pins resist corrosion. Just pull the large red knob to release, and your extinguisher is ready to use. Mounts directly to any size roll bar, or can be bolted down to any surface. Works great with most 3-3.5" diameter bottles