4 x 110mm - 10x1.25 Stud Wheel Spacer - 1" Thick - Yamaha Rhino

CNC milled using high quality aerospace aluminum for durability and fit. These spacers are a great solution for clearance problems when using aftermarket wheels.They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit.

Price is for a single wheel spacer. Select the quantity you need.

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Roof Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.

Be sure to choose the correct size and quantity before ordering!

A-Pillar Pod Light Mount Brackets for Polaris RZR

A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black. Fits all RZR models, 2008 - current.

**Does NOT fit Ride Command Dash. 2017 Polaris Ride Command Dash Panels will be available by May 1 2017**

Custom 6 piece CNC Billet Aluminum Dash panel for your Polaris Interactive Digital Display (GPS) equipped RZR XP 1000, S900, 900 Trail and 900 XC. (2015-up)

Complete Kit includes all 6 dash plates and 4 additional rocker switches
Available in several colors, be sure to make your selection above before ordering.

3 Inch LED Pod Light - 50 Caliber Racing

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

Polaris RZR XP1000 Bump Seat with Harness

50 Caliber Racing Bump Seat for the Polaris RZR is the performance and safety upgrade you need that will add a 3rd seat perfect for kids 60 lbs or less! This seat is made to be mounted in the middle front between driver and passenger or in the back between the rear stock seats.

Honda Rancher TRX350 Top End Cylinder Kit 2000-2006
DISCONTINUED
Complete top end rebuild kit for your Honda Rancher TRX350! Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.

Split Collar Tube Clamp for 1.875" O.D. Round Tubing - for Fabricating Bolt-on Accessories - Fits Can-AM X3 Roll Cage

50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Designed to give a rock solid base to build accessories off of. Just what you need for fabricating bolt-on parts like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.

* Price is for one clamp

RH Flanged Threaded Through Weld In Bung - 1.25" .095 Round with 1/2" x 20 Threads

Fits in 1.25" .095 tubing

Thread: 1/2" x 20
Overall Length: 1"
Flange Diameter: 1.25"

Mild Steel Material

Fuel Lines by the Foot 1/8" ID - 5/16" OD

50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

50 Caliber Racing -  5 x 4.5 (5 x 114.3 metric) Wheel Spacer

- Will fit most vehicles with 5 x 4.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

50 Caliber Racing 50 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R

Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!

Please select color and dash kit options before ordering!

50 Caliber Racing 30 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Head Lights"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

420 chain 120 link

50 Caliber Racing Quick fit 4/5-Point Harness — Built tough with EZ-adjust hardware for fast, precise adjustments. Ultra Kush padding delivers plush, pressure-free comfort for long sessions on the asphalt, trail, or track. Available in 2" or 3" straps with a wide fit range to suit almost any driver. Race-style latch/pull release and black anodized hardware give you secure, premium performance. Choose 4- or 5-point setups and match your style with colors like Sugar Skulls (Red/Black), Black, Red, Gold, Dark Green, Lime Green, Hot Pink, Bright Orange, or Purple.

Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages

Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.