Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

50 Caliber Racing - Yellow/White lightning RZR sticker kit 2014.

50 Caliber Racing - Polaris RZR Blue Fire sticker kit.

- 12x7 Beadlock wheel
- 4x156mm pattern
- 4/3 offset
- 6061 heat treated aluminum
-.190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11 lbs

- 26x9x12 inch Size Tire

50 Caliber Racing 6 ply Radial off road racing tires. These tires are great for all terrains. 6 ply are extremely hard to blow out or punture. The non-directional pattern provides predictable cornering and claws up roots and rocks, creating optimum climbing confidence.

**DISCONTINUED**

- 12x8 Beadlock Wheel
- 4x115mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs

Now you can take the whole family on UTV adventures! Upgrade your 4 Seat RZR PRO XP with a seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using including and existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

Be sure to select harness color before ordering!

Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

This is a 1 Piece Bottom Center Dash Panel for the the 2017 Polaris RZR XP1000 Ride Command Edition.

50" LED Light Bar Mounting Brackets and 50" Light Bar Combo for Yamaha Viking - Includes mounting brackets and light bar

Clamp on brackets allow you to brow mount a 50" Straight LED light bar on your Yamaha Viking. USA made from 1/8" steel plating with a black powdercoat finish. Includes an insanely powerful 50" LED light bar to light up your night time rides.

Discontinued

Radius LED light bar mount system COMBO for 2014-Up Can-Am Maverick / Commander - Includes mount and light bar

Fits the following Can-Am models:

- Commander 800 STD, DPS and XT (2014-up)
- Commander 1000 STD, DPS, XT, XT-P, LTD (2014-up)
- Commander 1000 MAX (2014-up)
- Maverick 1000 STD, XRS, DPS, XMR (2014 - up)

 50 Caliber Turbo Silver Polaris RZR Sticker Kit

 DISCONTINUED

- 12x7 Beadlock wheel
- 4x137mm pattern
- 4/3 offset
- 6061 heat treated aluminum
-.190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11 lbs

DISCONTINUED

Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

LED Light Bar Mounting Brackets for Polaris General 2 & 4 Seat Models

Bolt on brackets allow you to brow mount a 50 Caliber Racing 40" LED light bar on your Polaris General UTV. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Purchase brackets only or as a combo with a 40" LED light bar of your choice.

Be sure to choose a lighting option before ordering!

Custom Front Bumper for Polaris RZR XP1000 and S 900

When you take your RZR off road, anything can happen. Protect your RZR with our heavy duty tubular steel bumper. 100% hand-built in the USA by 50 Caliber Racing.

Fits the following Polaris models:

- XP 1000 (2014 - 2018)
- Trail 900 (2015 - 2018)
- High Performance S 900 (2015 - 2018)
- Trail 900 XC (2015 - 2018)

50 Caliber Racing - 4 x 115 Wheel Spacer - 10x1.25 Stud - 2" Thick

CNC wheel spacers offer wider stance for better stability and more tire clearance. 4x115 bolt pattern with 10x1.25mm studs to fit many ATV and UTV models. Includes lug nuts.

Price is for one wheel spacer

- 12x8 Beadlock wheel
- 4x137mm pattern
- 4/4 offset
- 6061 heat treated aluminum
-.160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 10.2 lbs

50 Caliber Racing - Liquid silver sticker kit

50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look. 

Be sure to choose kit size before ordering!