Best sellers

Active filters

  • Availability: Available
  • Brand: 50 Caliber Racing
  • Light Bar LED Radius (Curved) 50in

    Price $199.99

    50 Caliber Racing 50 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response

  • "Whip Light" On/Off Rocker Switch Waterproof Sexy...

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

    "Whip Light"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!

  • Light Bar LED Radius (Curved) 30in

    Price $159.99

    50 Caliber Racing 30 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response

  • 50 Caliber aluminum skid plate

    Price $35.00

    50 Caliber Racing aluminum skid plate. Protect your motor before its too late. Fits all Honda crf xr 50 and 70s.

    Honda xr50, crf50, and xr70.

     

    NOTE**** These skid plates all have blemishes in them. They were not packaged good and all have minor scratches and or dings in them. 

     

  • RZR 40" After Market Roll Cage Light Bar Brackets

    Price $110.00

    Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages

    Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.

  • Uniball Bearing Fabrication Kit - .5" to 1.5" Bore

    Price $32.99

    50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

    Be sure to choose bearing size before ordering!

  • Kawasaki Teryx4 Rear Bump Seat & Safety Harness

    Price $314.99

    Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

    Be sure to select harness color before ordering!

  • Ride Command XP1000 6 Switch Dash Panel

    Price $224.99

    This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.

    *When ordering please select if you want to included Switches.


  • YXZ 1000R Custom CNC 4 Switch Dash Panel

    Price $99.99

    Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R

    Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!

    Please select color and dash kit options before ordering!

  • Wheel Spacer 6 x 5.5 Inch 12mm Stud

    Price $22.00

    50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs

    - Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • RZR XP Turbo & XP1K Tie Rod Set Heavy Duty

    Price $349.99

    RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000

    Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

    Be sure to specify finish before ordering!

  • Left Hand 1"- 1 3/4" Weld In Bungs

    Price $9.99

    50 Caliber Racing Steel Weld In Bung.


    Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

    Be sure to select the quantity before ordering!

  • RZR Turbo S Heavy Duty Tie Rods

    Price $269.99

    50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019

    Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

    Be sure to choose finish before ordering!

  • 14x1.5mm Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $88.99

    Solid Steel Extended Spike Lug Nuts - 14x1.5mm Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!

  • "This Switch Turns Something On" On/Off Rocker...

    Price $22.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

    "This Switch Turns Something On"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!