RH Flanged Threaded Through Weld In Bung - 1.25" .095 Round with 1/2" x 20 Threads
Fits in 1.25" .095 tubing
Thread: 1/2" x 20
Overall Length: 1"
Flange Diameter: 1.25"
Mild Steel Material
50 Caliber 1 inch wheel spacers 4x137mm with 10x1.25 pitch stud
- 6061 Billet Aluminum
- 1 inch thick
- Lifetime warranty
- Flat profile nuts to mount spacer to vehicle included
- Easy installation
- Fits Can-am Commander, Maverick and all 4x137 patterns using 10x1.25 pitch studs
Price is per spacer
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"This Switch Turns Something On"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
50 Caliber Racing - 5 x 4.5 (5 x 114.3 metric) Wheel Spacer
- Will fit most vehicles with 5 x 4.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
50 Caliber Racing 50 inch LED Curved (radius) Light Bar
Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.
- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response
50 Caliber Racing 30 inch LED Curved (radius) Light Bar
Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.
- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response
50 Caliber Racing aluminum skid plate. Protect your motor before its too late. Fits all Honda crf xr 50 and 70s.
Honda xr50, crf50, and xr70.
NOTE**** These skid plates all have blemishes in them. They were not packaged good and all have minor scratches and or dings in them.
Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages
Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.
Be sure to select harness color before ordering!
This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.
*When ordering please select if you want to included Switches.
Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R
Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!
Please select color and dash kit options before ordering!
50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs
- Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"
Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.
Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty.
50 Caliber Racing Steel Weld In Bung.
Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread.
Be sure to select the quantity before ordering!
50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019
Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!
Be sure to choose finish before ordering!
