Home

Best sellers

Active filters

  • Categories: ATV Parts & Performance
  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • 3/4" 4 Link Kit Chromoly Heim - 1.5" OD Tubing and high misalignment spacers included

    4 Link Rod End Kit - 3/4" Chromoly Heim - 1.5" OD...

    Price $179.99

    50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 8 Way Standard LED Circuit Blade Fuse Box
    • On sale!

    8 Way Standard LED Circuit Blade Fuse Box

    Price $22.99

    8 Way Standard LED Circuit Blade Fuse Box

    This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.
  • 88cc stage 1 big bore kit for honda for xr and crf 70

    88cc stage 1 big bore kit for honda for xr and crf 70

    Price $155.00

    Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years

    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (can still run pump gas)
    - Head gasket kit includes all gasket needed to install bore kit.
  • .50 Caliber Extended Swingarms Kit 1
    • Out-of-Stock

    .50 Caliber Extended Swingarms Kit 1

    Price $499.00

    DISCONTINUED

    Fits Honda xr50 and crf50 and many chinese Pit Bikes

     

    This is our new 3+ swingarm. We call it the big bike swingarm because thats what will have after you add this. Rides incredible compared to stock style swingarms and delivers 9 inches of wheel travel. This is the biggest bang for the buck when it comes to swingarms for your 50.
  • Honda Trail Bikes HD Auto Clutch Assembly
    • Out-of-Stock

    Trail Bikes HD Auto Clutch

    Price $85.00

    Honda Trail Bikes Heavy Duty Auto Clutch kit. This clutch is a great improvement to your stock clutch. We recommend this kit with any upgraded/big bore motor. The stock clutch is designed for a stock motor and that's that. If you want reliablilty and power this is a must have performance upgrade. Fits 1992 to current year models. z50, xr50, and crf50
  • Replacement Honda 50 Forks 92-Up CRF50 XR50 Gold Finish

    Replacement Honda 50 Forks 92-Up CRF50 XR50

    Price $69.99

    50 Caliber Racing Replacement Forks for Honda XR50 and CRF50 Pit Bikes - Stock Height

    One set of 50 Caliber Racing replacement forks. Stock height and spring rate. Available in original Gold finish for a clean, stock look. Fix your kids bike the easy way. Installation is quick and easy, and requires no modifications.
  • Top End Kit for Yamaha YFM250 Bear Tracker Moto-4 and Timberwolf ATVs
    • Out-of-Stock

    Yamaha Moto-4 250 Top End Cylinder Kit YFM250

    Price $125.00

    Yamaha Moto-4 250 Top End Cylinder Kit 1989-2004, YFM250

    Complete top end rebuild kit for your Yamaha YFM250 Moto-4, Bear Tracker and Timberwolf ATV. Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.
  • Tall Seat for CRF70
    • Out-of-Stock

    Tall Seat for CRF70

    Price $45.00

    50 Caliber tall seat. These will work for 2004-up Honda CRF70. The seats have a nice firmness to them and a mild grip cover. Comes complete with foam and cover.

    Fits the following Honda pit bikes:
    XR70  (2002-2003) *must have CRF70 gas tank
    CRF70 (2004-2018)
  • 50 Cal's Yamaha Rhino 660cc Performance CDI box

    Yamaha Rhino Grizzly 660 CDI

    Price $119.99

    50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

    Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

     
  • Extended Forks - 2" Taller for Honda 50 92-Up CRF50 XR50

    Extended Forks - 2" Taller for Honda 50 92-Up CRF50...

    Price $119.99

    50 Caliber Racing Extended Forks - 2" Taller than stock for Honda XR50 and CRF50 Pit Bikes

    One set of 50 Caliber Racing extended forks. 2 Inches taller than stock height with stock spring rate. Black finish for a stealth, custom look. Fix your kids bike the easy way. Installation is quick and easy, and requires no modifications.
  • Manual Clutch Kit for Honda Z50 CRF50 XR50 Pit Bikes
    • Out-of-Stock

    Manual Clutch Kit for Honda Z50 CRF50 XR50 Pit Bikes

    Price $150.00

    This item is not currently in production.


    50 Caliber Racing Manual Clutch Kit for Honda Z50 CRF50 XR50 Pit Bikes 1988 - Up

     

    Complete kit allows you to convert your 3 speed semi-auto Honda to a 3 speed manual with clutch. Our kit includes a 3 plate clutch for maximum strength to handle 88c – 108cc big bore kit power without slippage.  This is an awesome way to spice up your big bore Honda 50.
  • Plastics Kit for KTM 50 SX 2002-08
    • Out-of-Stock

    Plastics Kit for KTM 50 SX 2002-08

    Price $65.00

    50 Caliber Racing Red Plastics Kit for KTM 50cc Pit Bikes 2002-2008

    High quality replacement set of plastics. Injection molded, high gloss, and a perfect OEM fit.
  • 4 Link Rod End Kit - 7/8" Chromoly Heim - 1.75" OD .120 Wall Bung - WITH Spacers

    4 Link Rod End Kit - 7/8" Chromoly Heim - 1.75" OD...

    Price $269.99

    Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • Polaris Scrambler 500 Rear Brake Caliper

    Polaris Scrambler 500 Rear Brake Caliper

    Price $64.99

    Polaris Scrambler 500 Rear Brake Caliper with Pads

    50 Caliber Racing Rear Brake Caliper assembly for the 1998-2004 Polaris Scrambler 500 2x4, 4x4 ATV. It comes fully assembled including Pads to replace the factory Brake Caliper for your Scrambler with direct replacement for Polaris Part numbers listed.
  • Tie Rod End Kit Yamaha Warrior ATV

    Tie Rod End Kit Yamaha YFM350 ATV

    Price $25.00

    Tie Rod End Kit for Yamaha ATVs

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.