50 Caliber Racing 50 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Whip Light"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber Racing 30 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages

Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.

50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!

Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

Be sure to select harness color before ordering!

This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.

*When ordering please select if you want to included Switches.

Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R

Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!

Please select color and dash kit options before ordering!

16 Tapered Splined Lug Nuts with Chrome Finish and Anodized Aluminum Spike - 3/8 x 24 Thread Pitch

Be sure to select color before ordering!.

50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs

- Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000

Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

Be sure to specify finish before ordering!

50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019

Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to choose finish before ordering!

Lower Door Skin inserts for Can-Am Maverick X3 MAX 4 Seater Models

Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your X3 a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using included and existing hardware. For 4 seat models only.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

Solid Steel Extended Spike Lug Nuts - 14x1.5mm Thread Size

Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

Be sure to select kit size and color before ordering!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"This Switch Turns Something On"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber Racing On/On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.

Polaris General Bump Seat with Harness (4 seat model)

50 Caliber Racing Bump Seat for the Polaris General is the perfect upgrade to get the entire family having fun together! This seat is made to be mounted in the rear of the vehicle between the 2 rear seats. 

12 Way Standard LED Circuit Screw Fuse Block

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Heavy Duty Radius Rod Kit for RZR XP Turbo (fits both 2 and 4 seat models)

Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 5/8" chromoly heim joints. This setup is bulletproof. Available in raw or powdercoat finish.

Be sure to specify your RZR year & desired finish before ordering!