Best sellers
Active filters
-
-
- Out-of-Stock
.50 Caliber Extended Swingarms Kit 2
Price $350.00DISCONTINUED
Kit 2 Comes with everything in kit 1 except a shock. This kit comes with an 800 pound Eibach spring that can be used with a 50caliber shock, Ishock, or almost any other 10 1/2 - 11 1/2" eye to eye shock. Please check to make sure spring with fit your shock if its not listed above. Spring dimensions = inner diameter is 32.5mm and total length is 7 1/4 inches.
-
Black Billet Twist Throttle
Price $29.99Black 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
-
Sway Bar Link Fab Kit - 1/2" Chromoly Heim - 1" OD...
Price $88.99Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Panhard Bar Fab Kit - 1/2" Chromoly Heim - 1" OD...
Price $49.99Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
50 Caliber complete plastics kit
Price $50.00Full Aftermarket Plastic Kit
Honda xr50(2002+)Honda crf50 (all years)
On sale for limited time! Blow out item!This is a complete plastics kit with all pieces needed. There are lots of plastic kits out there now with no fork leg covers. This kit includes every piece you need to replace stock plastics.
-
Extended Swing Arm - Black
Price $185.99.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
-
-
- On sale!
- Out-of-Stock
Gasket Head 52mm 110cc-125cc
Price $10.0050 Caliber Racing 52mm Head Gasket Kit for 110cc and 125cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
-
-
CNC Roll Cage and Bumper Insert/End Caps 1.75"
Price $45.00Billet Aluminum CNC Roll Cage/Bumper End Caps fits 1.75" tubing .095
-
- Out-of-Stock
Honda 50 Improved Tapered Roller Headset Bearings
Price $30.00Out of stock and discontinued
Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
-
Uniball Spherical Bearings - .5" to 1.5" Bore
Price $39.9950 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Be sure to choose bearing size before ordering! -
4 Link Rod End Kit - 5/8 Chromoly Heim - 1.25 OD Tubing
Price $159.99Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Weld In Bung - 1.25" OD .120 Wall Tube - 5/8-18...
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering! -
-
Panhard Bar Fab Kit - 3/4" Chromoly Heim - 1.75" OD...
Price $69.9950 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
- Out-of-Stock
-
52mm 88cc 110cc 125cc Head gasket and clutch gasket...
Price $18.0052mm 88cc 110cc 125cc Head gasket and clutch gasket kit for Honda 50 and Chinese Lifan motor.
-
Blue Billet Twist Throttle
Price $29.99Blue 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.