Active filters
Polaris General Bump Seat with Harness (4 seat model)
50 Caliber Racing Bump Seat for the Polaris General is the perfect upgrade to get the entire family having fun together! This seat is made to be mounted in the rear of the vehicle between the 2 rear seats.
Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"
Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.
Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty.
12 Way Standard LED Circuit Screw Fuse Block
This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.
Heavy Duty Radius Rod Kit for RZR XP Turbo (fits both 2 and 4 seat models)
Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 5/8" chromoly heim joints. This setup is bulletproof. Available in raw or powdercoat finish.
Be sure to specify your RZR year & desired finish before ordering!
5 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP 900. This panel allows you to add additional switches for lights and accessories. Made in the USA!
2 Inch LED Pod Light - 50 Caliber Racing
50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.
50" Radius LED Light Bar Mounting Brackets for 2010-2013 Can Am Maverick / Commander
Clamp on brackets allow you to brow mount a 50" Curved LED light bar on your Can-am Maverick or Commander. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
Patented Design
- 12x10 Beadlock Wheel
- 4x137mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
DISCONTINUED
- 12x8 Beadlock Wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs
50 Caliber Racing Brake Rotors with Lifetime Warranty for the XP1000 is the performance upgrade you need over replacement stock rotors to give your RZR more reliable stopping power.
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
DISCONTINUED
- 12x10 Beadlock Wheel
- 4x156mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels and 4 additional rocker switches
Split Collar Tube Clamp 11/16" Wide 1.75" I.D. - for Fabricating Bolt-on Accessories
Tube clamp for adding on after thought accessories, weldable steel split collar tube clamp. CNC machined for accurate fit with protective oil coating that can be directly welded on.
* Price is for one clamp
50 Caliber Racing 12V Wire Harness Kit with Relay and Switch
Universal 12 Volt wire harness kit complete with 40 amp relay, fuse and On/Off switch. This kit will allow you to safely connect a LED Light Bar, Fog Light, Lighted Whip, Pod Lights, or any other 12 volt accessories to your vehicle.
50 Caliber Racing's 501 Machined Beadlock Wheels 5x4.5 for Polaris ProR & TurboR
- Available in 15x8 & 15x10
- True beadlock wheel
- Aluminum spun 3 piece wheels
- 5/3 offset for 8" and 5/5 offset for 10"
- 6061 heat treated aluminum
- .190 thickness
- Machined billet Aluminum 3 piece wheel
- Double rolled inside lip for added strength
- Powder coat finish
- wheel weight 8" 20lbs, 10" 21lbs
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels (no rocker switches)
Solid Steel 3.5 Inch Extended Spike Lug Nut - Singles
Heat treated, hardened steel lug nuts with 3.5" extended spikes for your ATV or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels. Requires extra long socket key for installation/removal. Available in several thread sizes and colors. Price is for one lug nut.
Be sure to choose thread size, color and quantity before ordering!
6 Way Standard LED Circuit Blade Fuse Box aka Power block
This power block is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.
