Best sellers

Active filters

  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • A-Pillar Pod Light Mount Brackets for Polaris RZR

    Price $49.99

    A-Pillar Pod Light Mount Brackets for Polaris RZR

    A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black. Fits all RZR models, 2008 - current.

  • 3 inch LED Pod Light

    Price $34.99

    3 Inch LED Pod Light - 50 Caliber Racing

    50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

    • Out-of-Stock

    Elite Series LED Light Bar 31 Inch Spot Beam 180 Watt

    Price $199.99

    Elite Series 31 inch Spot Beam 180 Watt LED Light Bar

    You won't believe how much throw these lights have! 50 Caliber Racing Elite Series lighting with deep cone optics cranks out 2X the output of typical automotive LED light bars. These lights mean business!

    - ATV and UTV
    - 4x4 and Off Road
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response Vehicles

  • RZR Dash Panel Digital GPS 6 piece with switches

    Price $224.99

    **Does NOT fit Ride Command Dash. 2017 Polaris Ride Command Dash Panels will be available by May 1 2017**


    Custom 6 piece CNC Billet Aluminum Dash panel for your Polaris Interactive Digital Display (GPS) equipped RZR XP 1000, S900, 900 Trail and 900 XC. (2015-up)

    Complete Kit includes all 6 dash plates and 4 additional rocker switches
    Available in several colors, be sure to make your selection above before ordering.

  • Split Collar Tube Clamp for 1.875" OD - Can-Am X3

    Price $29.99

    Split Collar Tube Clamp for 1.875" O.D. Round Tubing - for Fabricating Bolt-on Accessories - Fits Can-AM X3 Roll Cage

    50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Designed to give a rock solid base to build accessories off of. Just what you need for fabricating bolt-on parts like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.

    * Price is for one clamp

    • Out-of-Stock

    4x137 Wheel Spacer 10x1.25mm studs 1"

    Price $24.99

    50 Caliber 1 inch wheel spacers 4x137mm with 10x1.25 pitch stud

     

    - 6061 Billet Aluminum
    - 1 inch thick
    - Lifetime warranty
    - Flat profile nuts to mount spacer to vehicle included
    - Easy installation
    - Fits Can-am Commander, Maverick and all 4x137 patterns using 10x1.25 pitch studs

     

     

    Price is per spacer

  • Light Bar LED Radius (Curved) 50in

    Price $199.99

    50 Caliber Racing 50 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response

  • "Whip Light" On/Off Rocker Switch Waterproof Sexy...

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

    "Whip Light"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!

  • Light Bar LED Radius (Curved) 30in

    Price $159.99

    50 Caliber Racing 30 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response

  • 50 Caliber aluminum skid plate

    Price $35.00

    50 Caliber Racing aluminum skid plate. Protect your motor before its too late. Fits all Honda crf xr 50 and 70s.

    Honda xr50, crf50, and xr70.

     

    NOTE**** These skid plates all have blemishes in them. They were not packaged good and all have minor scratches and or dings in them. 

     

  • RZR 40" After Market Roll Cage Light Bar Brackets

    Price $110.00

    Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages

    Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.

  • Uniball Bearing Fabrication Kit - .5" to 1.5" Bore

    Price $32.99

    50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

    Be sure to choose bearing size before ordering!

  • Kawasaki Teryx4 Rear Bump Seat & Safety Harness

    Price $249.99

    Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

    Be sure to select harness color before ordering!

  • Ride Command XP1000 6 Switch Dash Panel

    Price $224.99

    This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.

    *When ordering please select if you want to included Switches.


  • YXZ 1000R Custom CNC 4 Switch Dash Panel

    Price $99.99

    Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R

    Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!

    Please select color and dash kit options before ordering!