Home

Best sellers

Active filters

  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • Polaris RZR Dash Panel Digital GPS 6 pc BLUE with switches

    RZR Dash Panel Digital GPS 6 piece with switches

    Price $224.99

    **Does NOT fit Ride Command Dash. 2017 Polaris Ride Command Dash Panels will be available by May 1 2017**


    Custom 6 piece CNC Billet Aluminum Dash panel for your Polaris Interactive Digital Display (GPS) equipped RZR XP 1000, S900, 900 Trail and 900 XC. (2015-up)

    Complete Kit includes all 6 dash plates and 4 additional rocker switches
    Available in several colors, be sure to make your selection above before ordering.
  • Split Collar Tube Clamp for 1.875" OD - Can-Am X3

    Split Collar Tube Clamp for 1.875" OD - Can-Am X3

    Price $29.99

    Split Collar Tube Clamp for 1.875" O.D. Round Tubing - for Fabricating Bolt-on Accessories - Fits Can-AM X3 Roll Cage

    50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Designed to give a rock solid base to build accessories off of. Just what you need for fabricating bolt-on parts like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.

    * Price is for one clamp
  • Wheel Spacers 4x137 1 inch 10mm
    • Out-of-Stock

    4x137 Wheel Spacer 10x1.25mm studs 1"

    Price $24.99

    50 Caliber 1 inch wheel spacers 4x137mm with 10x1.25 pitch stud

     

    - 6061 Billet Aluminum
    - 1 inch thick
    - Lifetime warranty
    - Flat profile nuts to mount spacer to vehicle included
    - Easy installation
    - Fits Can-am Commander, Maverick and all 4x137 patterns using 10x1.25 pitch studs

     

     

    Price is per spacer
  • 50" Curved LED Light Bar - IP68 Waterproof Housing - 50 Caliber Racing

    Light Bar LED Radius (Curved) 50in

    Price $199.99

    50 Caliber Racing 50 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response
  • Waterproof On/Off Rocker Switch Sexy Design "Whip Light" with Green LED Illumination

    "Whip Light" On/Off Rocker Switch Waterproof Sexy...

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

    "Whip Light"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!
  • 30" Curved LED Light Bar - IP68 Waterproof Housing - 50 Caliber Racing

    Light Bar LED Radius (Curved) 30in

    Price $159.99

    50 Caliber Racing 30 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response
  • 50 Caliber aluminum skid plate

    50 Caliber aluminum skid plate

    Price $35.00

    50 Caliber Racing aluminum skid plate. Protect your motor before its too late. Fits all Honda crf xr 50 and 70s.

    Honda xr50, crf50, and xr70.

     

    NOTE**** These skid plates all have blemishes in them. They were not packaged good and all have minor scratches and or dings in them. 

     
  • Polaris RZR XP1000 Radius Light Bar Brackets

    RZR 40" After Market Roll Cage Light Bar Brackets

    Price $110.00

    Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages

    Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
  • 50 Caliber Racing Bump Seat with 2" Safety Harness for Kawasaki Teryx 4 Seater - Supple vinyl upholstery with harness slot

    Kawasaki Teryx4 Rear Bump Seat & Safety Harness

    Price $314.99

    Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

    Be sure to select harness color before ordering!
  • Ride Command XP1000 6 Switch Dash Panel

    Ride Command XP1000 6 Switch Dash Panel

    Price $224.99

    This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.

    *When ordering please select if you want to included Switches.
  • YXZ 1000R Custom CNC 4 Switch Dash Panel

    YXZ 1000R Custom CNC 4 Switch Dash Panel

    Price $99.99

    Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R

    Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!

    Please select color and dash kit options before ordering!
  • 50 Caliber Racing Aftermarket Performance Pipe
    • Out-of-Stock

    50 Caliber Performance Pipe

    Price $0.00

    50 Caliber Racing Performance Pipe. This pipe will add horse power and give your 50 a great sound. Header tube is 1" inside diameter all the way to the muffler. Pipe will bolt right up to the stock mounts on header and the rear of the frame. Muffler is solid aluminum and comes polished, red, or black. Fits crf and xr50s.

    DISCONTINUED
  • RZR XP1000 Tie Rod Set 2017 Heavy Duty

    RZR XP Turbo & XP1K Tie Rod Set Heavy Duty

    Price $349.99

    RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000

    Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

    Be sure to specify finish before ordering!
  • RZR Turbo S Heavy Duty Tie Rods - Raw Aluminum Complete Kit

    RZR Turbo S Heavy Duty Tie Rods

    Price $269.99

    50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019

    Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

    Be sure to choose finish before ordering!
  • Can-am X3 MAX Lower Door Skins - 4 Seater Models
    • Out-of-Stock

    Can-am X3 MAX Lower Door Skin Inserts - 4 Seater Models

    Price $219.99

    Lower Door Skin inserts for Can-Am Maverick X3 MAX 4 Seater Models

    Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your X3 a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using included and existing hardware. For 4 seat models only.
  • 88cc stage 2 big bore kit for honda xr70 and crf 70

    88cc stage 2 big bore kit for honda xr70 and crf 70

    Price $279.99

    Stage 2 88cc Big Bore kit for Honda xr70 and crf70 all years

    - 20mm Carburetor kit

    - Performance camshaft
    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (you can still run pump gas)
    - Head gasket kit