50 Caliber Racing - 5 x 4.5 (5 x 114.3 metric) Wheel Spacer
- Will fit most vehicles with 5 x 4.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
50 Caliber Racing 50 inch LED Curved (radius) Light Bar
Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.
- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response
High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.
Be sure to choose the correct size and quantity before ordering!
50 Caliber Racing 30 inch LED Curved (radius) Light Bar
Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.
- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response
50 Caliber Racing aluminum skid plate. Protect your motor before its too late. Fits all Honda crf xr 50 and 70s.
Honda xr50, crf50, and xr70.
NOTE**** These skid plates all have blemishes in them. They were not packaged good and all have minor scratches and or dings in them.
Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages
Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
50 Caliber Racing 3" 4 Point Safety Harness
- 3" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- Available in 4 and 5 Point (antisubmarine strap)
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green and Purple
Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs.
Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.
Be sure to select harness color before ordering!
This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.
*When ordering please select if you want to included Switches.
16 Tapered Splined Lug Nuts with Chrome Finish and Anodized Aluminum Spike - 3/8 x 24 Thread Pitch
Be sure to select color before ordering!.
50 Caliber Racing Performance Pipe. This pipe will add horse power and give your 50 a great sound. Header tube is 1" inside diameter all the way to the muffler. Pipe will bolt right up to the stock mounts on header and the rear of the frame. Muffler is solid aluminum and comes polished, red, or black. Fits crf and xr50s.
DISCONTINUED
50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing Steel Weld In Bung.
Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread.
Be sure to select the quantity before ordering!
50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019
Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!
Be sure to choose finish before ordering!
Lower Door Skin inserts for Can-Am Maverick X3 MAX 4 Seater Models
Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your X3 a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using included and existing hardware. For 4 seat models only.
RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Custom CNC Billet Aluminum 4 Switch Dash Panel for Yamaha YXZ 1000R
Looking for a place to add dash switches to your YXZ 1000R? Our custom dash panel gives you 4 additional full size switch locations and an access hole so you don’t have to lose the handy dash cubby. Available with powder coat finish or raw aluminum. Made in the USA!
Please select color and dash kit options before ordering!
KTM 50 Water Cooled Top End Cylinder Kit 2002-2008
DISCONTINUED
Complete top end rebuild kit for your KTM 50 Pit Bike! Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.
