Wet Clutch Assembly for Yamaha Rhino and Grizzly 660

Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.

Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)

50 Caliber Racing - 6 x 135mm  Wheel Spacer - Ford 6 Lug 1999-2014

- Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.

Please choose size and quantity before ordering

Tie Rod End Kit for Suzuki LT250 ATV

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

50 Caliber Racing Beer/soda Can Koozie

- Keeps Hands Warm

- Keeps Beers Cold

- 2 Sided Print, 1 side 50 cal logo, other side slogan

- Multiple designs to choose from

50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Universal 6 Way Covered 12V Screw Fuse Box Block with Ground Terminals

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

Solid Steel Extended Spike Lug Nuts - 12x1.25mm Thread Size

Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 16, 20, and 24 lug nuts, with several colors to match any color scheme.

Be sure to select kit size and color before ordering!

50 Caliber Racing - 5x150mm Wheel Spacer

- Will fit most vehicles with 5x150mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

2 inch LED Pod Lights

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury.

50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.

Be sure to choose correct size before ordering!

Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "GPS"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Bilge Pump"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "LED Light Bar"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

This pair of 50 Caliber Racing LED lighted whips are super bright and fully adjustable with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal Flag and swivel clip mounts. Available in 2, 4 and 6 foot lengths.

Be sure to choose length when ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "420 Leaf"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Dome Light" Girl

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

16 Splined Lug Nuts with Chrome Finish and Anodized Aluminum Spike - 12  x  1.25mm Thread Pitch

Be sure to select color before ordering!.