50 Caliber Racing Sale (5)

3.5 Inch Spike Lug Nut Singles

$5.75

Solid Steel 3.5 Inch Extended Spike Lug Nut - Singles

Heat treated, hardened steel lug nuts with 3.5" extended spikes for your ATV or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels. Requires extra long socket key for installation/removal. Available in several thread sizes and colors. Price is for one lug nut.

Be sure to choose thread size, color and quantity before ordering!

6 Way Standard LED Circuit Blade Fuse Box

On sale!

12v 6 Piece Fuse power block aka power panel

$20.99

6 Way Standard LED Circuit Blade Fuse Box aka Power block

This power block is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Adjustable clutch weights will maximize your performance in your RZR

Clutch Kit for Polaris XP900 XP1000

$169.00

Adjustable Clutch Weight Kit for Polaris RZR XP900, XP1000 2 & 4 Seat Non-Turbo

- Fine tune when and where your power hits
- Adjust power range to compensate for increased HP, tire size, etc..
- Achieve maximum HP out of your RZR
- Increase Maximum RPM operating range
- Puts you in control of your power!

Yamaha YXZ 1000R Front Bumper

$199.99

Custom Front Bumper for Yamaha YXZ 1000R.

When you take your Yamaha YXZ 1000R off road, anything can happen. Protect your YXZ with our heavy duty steel bumper. 100% hand-built in the USA by 50 Caliber Racing.

Fits the following Yamaha models:

All Yamaha YXZ 1000R Models.

XP1000 3 piece Dash Panel Orange with switches

$224.99

3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

This is the complete kit that includes all 3 panels and 4 additional rocker switches

4 Switch Dash Panel Silver Blue Switches 1

4 Switch Dash Panel Machined Finish

$80.00

4 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP 900. This panel allows you to add additional switches for lights and accessories. Made in the USA!

Universal UTV Breakaway Side View Mirrors

$60.99

50 Caliber Racing Universal Side Mirrors (Pair) for your UTV. Set of two mirrors for driver side and passenger side that feature a breakaway design. High impact ABS housing with shatter-proof tempered glass and ball socket joint for unlimited viewing angles. Actual mirror dimensions: 3.75″ x 7.25″ includes clamps & rubber sleeves to fit OD 1-5/8″ and up to 2″ Round Tubing.

A-Pillar Pod Light Mount Brackets for Arctic Cat...

$34.99

A-Pillar Pod Light Mount Brackets for Arctic Cat Wildcat

50 Caliber Racing A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Arctic Cat Wildcat. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel with black powder coat finish.

XP1000 3 piece Dash Panel (Only) Red

$204.99

3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

This is the complete kit that includes all 3 panels only

Waterproof On/Off Rocker Switch Sexy Design "Rear Lights" with Green LED Illumination

"Rear Lights" On/Off Rocker Switch Waterproof Sexy...

$21.99

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Rear Lights"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

88cc stage 1 Vintage big bore kit for honda z50,...

$155.00

Vintage Stage 1 88cc Big Bore kit (52mm bore)

- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.

Polaris RZR XP1000 Radius Light Bar Bracket Combo...

$249.99

Radius LED Light Bar Mounting Bracket COMBO for Polaris RZR XP1000 and S 900 - Includes mounting brackets and 40" Curved Light Bar

Fits the following Polaris models:

- XP 1000 (2014 - up)
- Trail 900 (2015 - up)
- High Performance S 900 (2015 - up)
- Trail 900 XC (2015 - up)

On/Off Rocker Switch "Show Me Your Tits" Sexy Girl Design Blue Illumination

"Show Me Your ..." On/Off Rocker Switch Waterproof...

$21.99

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Show Me Your ..."

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber Racing Nautical Star On/Off LED Rocker...

$19.99

50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Heavy Duty Adjustable Ball Joint Polaris RZR XP1000...

$59.99

Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.

On sale!

Can-Am X3 Bump Seat with Harness

$355.00

Can-Am X3 Bump Seat with Harness

50 Caliber Racing Bump Seat for the Can-Am X3 is the perfect upgrade to get the entire family having fun together! This seat is made to be mounted in the middle front between driver and passenger or in the back between the rear stock seats.

4 Link Rod End Kit - 1/2" Chromoly Heim - 1" OD Tubing

$149.99

Complete 4 link fabrication kit with 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed specifically for 1" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Rod End Kit - Single Joint - 5/8 Chromoly Heim - 1.25 OD Tubing Dimensions - With Optional Misalignment Spacers

Single Joint Rod End - 5/8 Chromoly Heim - 1.25 OD...

$32.99

Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Kawasaki 12x8 Beadlock wheel 4x137mm pattern

On sale!

12x8 Beadlock wheel 4x137mm .190 4/4 Powdercoat

$99.00

- 12x8 Beadlock Wheel
- 4x137mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs

Quick Release Fire Extinguisher Mount

$39.99

50 Caliber Racing Quick Release Fire Extinguisher Mount . Two piece design with stainless hardware and multiple points of contact for rattle free reliable performance. Stainless catch pins resist corrosion. Just pull the large red knob to release, and your extinguisher is ready to use. Mounts directly to any size roll bar, or can be bolted down to any surface. Works great with most 3-3.5" diameter bottles

Home

Best sellers