Active filters
50 Caliber Rev Box. This rev box will remove the stock rev limiter and allow your pit bike to max out its performance and rpm's. Improved timing curve. Great bang for the buck! Fits all years of Honda xr50 and crf50
15 tooth sprocket made for a 428 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes buggy's go karts and many other applications.
50 Caliber Racing 52mm Gasket kit for 110cc and 125cc Lifan Engines Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes two Left and two Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
50 Caliber Racing Main Jet Kit for 20mm Performance Honda 50 Carburetor
Main jet kit designed to fit a 50 Caliber Racing 20mm performance carburetor (part #4211). This kit includes sizes: 82, 85, 87, 90, 92, & 95. The carburetor is equipped with an 89. Will also fit 20mm Keihin carburetors. Get your bike tuned to perfection with our high quality jet kit.
Carburetor 24mm Honda CB CL SL Models
With the 50 Caliber Racing 24mm Honda Carburetor you can upgrade your bike and you'll be back to riding in no time! This carburetor is for the1970s Vintage Honda Bikes but will also fit other bikes.
High Volume Oil Pump - Vintage Honda Z50
High volume oil pump for vintage Honda pit bikes and small ATVs. Delivers up to 3x the volume as the stock pump. We highly recommend upgrading your oil system when installing a big bore kit. Installation requires 2mm drill out of oiling outlet.
Performance camshaft for Honda xr crf 50 or 70. Will fit 2000-present
50 Caliber Racing Race Head, 88cc Big Bore kit, and 20mm Carburetor
Our Race Head has been updated for even more performance! It now has 25/22mm valves with better porting/flow. We also kept the combustion chamber the same size and changed the angle of the valves slightly. This will really wake up your stock engine and is comparable in power to the much larger Chinese 124cc engines!
Silver 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
Red Bolt Glue 250ml bottle high strength thread locking glue. This is a bolt glue by 50 Caliber Racing. Its purpose is to keep your nuts and bolts together! Its excellent for engines or any nuts and bolts that get vibration. If you are tired of nuts and bolts rattling lose this is your solution!
14 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. Bolt holes are 34mm eye to eye. This sprocket will fit atvs, pit bikes, and many other applications.
50 Caliber Racing 47mm Head Gasket Kit for 70cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
