Triple clamps for stock Honda 50 Forks. 2" risers.
DISCONTINUED
Full Aftermarket Plastic Kit
Honda xr50(2002+)
Honda crf50 (all years)
On sale for limited time! Blow out item!
This is a complete plastics kit with all pieces needed. There are lots of plastic kits out there now with no fork leg covers. This kit includes every piece you need to replace stock plastics.
DISCONTINUED
Kit 2 Comes with everything in kit 1 except a shock. This kit comes with an 800 pound Eibach spring that can be used with a 50caliber shock, Ishock, or almost any other 10 1/2 - 11 1/2" eye to eye shock. Please check to make sure spring with fit your shock if its not listed above. Spring dimensions = inner diameter is 32.5mm and total length is 7 1/4 inches.
Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
- Size: 16"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 9000 Lumens - 6000k
- FREE 50 Caliber Koozie with Each light bar order!
**DISCONTINUED**
- 12x7 Beadlock wheel
- 4x137mm pattern
- 4/3 offset
- 6061 heat treated aluminum
-.190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs
**DISCONTINUED**
- 12x10 Beadlock wheel
- 4x137mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 10.5 lbs
Note ** Discontinued.
- 12x10 Beadlock Wheel
- 4x110mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
50 Caliber Racing 52mm Head Gasket Kit for 110cc and 125cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
XP900 Roll Cage LED Light Bar Mount Rack and 30" LED light bar COMBO
DISCONTINUED
Includes mount and light bar. Bolts on to factory cage for 2 or 4 seat models.
Fits the following Polaris models:
XP900 (2011-2014)
800, 800s (2008-2015) 570 (2012-2015)
Out of stock and discontinued
Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
Polaris Sportsman 500 ATV Top End Cylinder Rebuild Kit
50 Caliber Racing stock bore size replacement kit. Includes all gaskets and components necessary to rebuild your top end. Manufactured to OEM spec, our kits are complete, high quality and will extend the life of your toys for many more years of enjoyment.
50 Caliber Robby Gordon Orange Madness Polaris RZR Sticker Kit
DISCONTINUED
50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Elite Series 34" Combo Beam 108 Watt LED Light Bar with Mounting Brackets for Yamaha YXZ1000R 2016-2019
You won't believe how much throw these lights have! 50 Caliber Racing Elite Series Combo Beam lights were designed with deep cone optics that crank out 2 times the output of typical automotive LED light bars so these lights mean business! Mounting Brackets to fit Yamaha YXZ1000R are included.
Discontinued
XP900 Roll Cage LED Light Bar Mount Rack for 30" Light Bar
DISCONTINUED
Includes mount and hardware. Bolts on to factory cage for 2 or 4 seat models.
Fits the following Polaris models:
XP900 (2011-2014)
800, 800s (2008-2015) 570 (2012-2015)
Now you can take the whole family on UTV adventures! Upgrade your 4 Seat RZR PRO XP with a seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using including and existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.
Be sure to select harness color before ordering!
Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
