Best sellers

Active filters

  • Availability: In stock
  • Categories: ATV Parts & Performance
  • Categories: Automotive
  • Categories: DIY Fabrication Stuff
  • Tie Rod End Kit Suzuki LT250

    Price $21.00

    Tie Rod End Kit for Suzuki LT250 ATV

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

  • Panhard Bar Fab Kit - 3/4" Chromoly Heim - 1.75" OD...

    Price $69.99

    50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

    • On sale!

    6 Way Screw 12V Fuse Block with Ground Terminals

    Price $25.99

    Universal 6 Way Covered 12V Screw Fuse Box Block with Ground Terminals

    Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
    Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

  • Illuminated Dual USB Rocker Switch

    Price $16.50

    Illuminated 50 Caliber Racing Dual USB Rocker Switch - USB Type A

    High quality 50 Caliber Racing backlit dual USB rocker switch allows you to charge you iPod, cell phone and other mobile devices. Operates on 12-24 Volts and outputs 5V at 3.1 Amps. Waterproof, durable switches are perfect for your boat car truck sand rail or UTV!

    Be sure to select the correct color before ordering!

  • Wheel Spacer 5x150mm 14x150 stud

    Price $28.00

    50 Caliber Racing - 5x150mm Wheel Spacer

    - Will fit most vehicles with 5x150mm bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • 2 inch LED Pod Lights

    Price $99.99

    2 inch LED Pod Lights

    50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury.

  • Chromoly Uniball Cups with Snap Ring

    Price $25.99

    50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.

    Be sure to choose correct size before ordering!

  • Single Joint Rod End - 7/8" Chromoly Heim - 1.75" OD...

    Price $42.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

  • Single Joint Rod End - 7/8" Chromoly Heim - 1.5" OD...

    Price $40.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

  • Panhard Bar Fab Kit - 5/8 Chromoly Heim - 1.25 OD...

    Price $54.99

    Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • 12x1.25mm Extended Spike Lug Nuts - 60 Degree Taper...

    Price $58.99

    Solid Steel Extended Spike Lug Nuts - 12x1.25mm Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 16, 20, and 24 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!

  • Illuminated On/Off Rocker Switch GPS

    Price $0.00

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "GPS"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • Illuminated On/Off Rocker Switch Bilge Pump

    Price $0.00

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Bilge Pump"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • Illuminated On/Off Rocker Switch LED Light Bar

    Price $16.50

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "LED Light Bar"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • PAIR of 50 Cal Spiral LED Lighted Whips with...

    Price $210.00

    This pair of 50 Caliber Racing LED lighted whips are super bright and fully adjustable with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal Flag and swivel clip mounts. Available in 2, 4 and 6 foot lengths.

    Be sure to choose length when ordering!

  • "Dome Light" On/Off Rocker Switch Waterproof Sexy...

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

    "Dome Light" Girl


    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!

  • Tie Rod End Kit Kawasaki KVF 750 Brute Force

    Price $25.00

    Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

  • Sway Bar Link Fab Kit - 3/4" Chromoly Heim - 1.75"...

    Price $119.99

    50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes two Left and two Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • Single Joint Rod End - 3/4" Chromoly Heim - 1.5" OD...

    Price $36.99

    Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!