Active filters
50 Caliber Racing - 8x170mm Wheel Spacer
- Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
- Available in 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.
20mm Carburetor for 88cc big bore engine on Honda 50's. This will also fit many pitbikes up to 125cc.
50 Caliber Racing's Elite Series 4 Point Harness seat belt with black hardware and push button release
- Available in 2" and 3" wide straps- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many designs and colors available: Sugar skulls red and black, Bandana red, black, blue
Available as harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.
50 Caliber Racing - 8x6.5 Inch (8 x 165.1 metric) Wheel Spacer
- Will fit most vehicles with 8x6.5" bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Jeep
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "LED Light Bar"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Left and right case gaskets for Honda 50, also fits all 50-125cc honda clone chinese engines.
.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Sexy Girl
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing Momentary Rocker Switch laser etched design "Horn"
High quality 50 Caliber Racing Illuminated Momentary Horn Rocker Switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
