Active filters
50 Caliber Racing Gas Tank for KTM 50cc Pit Bikes 2002-Current
High quality OEM exact fit replacement
Silver 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
50cal 271 High Strength RED Bolt Glue 50ml bottle high strength threadlocker. This is a bolt glue by 50 Caliber Racing. Its purpose is to keep your nuts and bolts together! Its excellent for engines or any nuts and bolts that get vibration. If you are tired of nuts and bolts rattling lose this is your solution!
50 Caliber Rev Box. This rev box will remove the stock rev limiter and allow your pit bike to max out its performance and rpm's. Improved timing curve. Great bang for the buck! Fits all years of Honda xr50 and crf50
15 tooth sprocket made for a 428 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes buggy's go karts and many other applications.
50 Caliber Racing 52mm Gasket kit for 110cc and 125cc Lifan Engines Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.
Rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
2 Honda CRF & XR 50 Aluminum Rims with Heavy Duty Spoke kits
A Pair (2) of high quality 6061 Aluminum Pit Bike Rims with 28 Spoke holes. Spokes are included. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits Honda CRF and XR 50 Pit Bikes.
50 Caliber Racing Tall Seat for Honda XR50 & CRF50 Pit Bikes
Bolt on upgrade for your Honda 50. This seat will raise the seated position higher for taller riders or longer legs. The seats have a nice firmness to them and a mild grip cover. Comes complete with foam and cover.
Fits the following Honda pit bikes:
- Honda XR50 (1992-2003)
- Honda CRF50 (2004-2018)
High Volume Oil Pump - Vintage Honda Z50
High volume oil pump for vintage Honda pit bikes and small ATVs. Delivers up to 3x the volume as the stock pump. We highly recommend upgrading your oil system when installing a big bore kit. Installation requires 2mm drill out of oiling outlet.
Red Bolt Glue 250ml bottle high strength thread locking glue. This is a bolt glue by 50 Caliber Racing. Its purpose is to keep your nuts and bolts together! Its excellent for engines or any nuts and bolts that get vibration. If you are tired of nuts and bolts rattling lose this is your solution!
14 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. Bolt holes are 34mm eye to eye. This sprocket will fit atvs, pit bikes, and many other applications.
50 Caliber Racing 47mm Head Gasket Kit for 70cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
