Home

Best sellers

Active filters

  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • 50 Caliber Racing Aftermarket Performance Pipe
    • Out-of-Stock

    50 Caliber Performance Pipe

    Price $0.00

    50 Caliber Racing Performance Pipe. This pipe will add horse power and give your 50 a great sound. Header tube is 1" inside diameter all the way to the muffler. Pipe will bolt right up to the stock mounts on header and the rear of the frame. Muffler is solid aluminum and comes polished, red, or black. Fits crf and xr50s.

    DISCONTINUED
  • 3/4" 4 Link Kit for 1.75" OD Tubing - Shown with Optional Misalignment Spacers
    • Out-of-Stock

    4 Link Rod End Kit - 3/4" Chromoly Heim - 1.75" OD...

    Price $179.99

    50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • RZR XP1000 Tie Rod Set 2017 Heavy Duty

    RZR XP Turbo & XP1K Tie Rod Set Heavy Duty

    Price $349.99

    RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000

    Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

    Be sure to specify finish before ordering!
  • Left Hand 1"- 1 3/4" Weld In Bungs

    Left Hand 1"- 1 3/4" Weld In Bungs

    Price $9.99

    50 Caliber Racing Steel Weld In Bung.


    Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

    Be sure to select the quantity before ordering!
  • RZR Turbo S Heavy Duty Tie Rods - Raw Aluminum Complete Kit

    RZR Turbo S Heavy Duty Tie Rods

    Price $269.99

    50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019

    Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

    Be sure to choose finish before ordering!
  • Can-am X3 MAX Lower Door Skins - 4 Seater Models
    • Out-of-Stock

    Can-am X3 MAX Lower Door Skin Inserts - 4 Seater Models

    Price $219.99

    Lower Door Skin inserts for Can-Am Maverick X3 MAX 4 Seater Models

    Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your X3 a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using included and existing hardware. For 4 seat models only.
  • 88cc stage 2 big bore kit for honda xr70 and crf 70

    88cc stage 2 big bore kit for honda xr70 and crf 70

    Price $279.99

    Stage 2 88cc Big Bore kit for Honda xr70 and crf70 all years

    - 20mm Carburetor kit

    - Performance camshaft
    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (you can still run pump gas)
    - Head gasket kit
  • "This Switch Turns Something On" On/Off Rocker Switch Waterproof Sexy Design

    "This Switch Turns Something On" On/Off Rocker...

    Price $22.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

    "This Switch Turns Something On"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!
  • On/On/Off Rocker Switch Red

    On/On/Off Rocker Switch

    Price $16.50

    50 Caliber Racing On/On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.


  • Billet Twist Throttle

    Carbon Fiber Billet Twist Throttle

    Price $26.99

    Carbon Fiber 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50 Handle Bars. We have 5 different colors to choose from.
  • Polaris General Bump Children's Seat
    • On sale!

    Polaris General Bump Seat with Harness

    Price $379.99

    Polaris General Bump Seat with Harness (4 seat model)

     

    50 Caliber Racing Bump Seat for the Polaris General is the perfect upgrade to get the entire family having fun together! This seat is made to be mounted in the rear of the vehicle between the 2 rear seats. 
  • Right Hand Heim 1/2-20

    Chromoly Heim Joints 1/2" - 7/8" RHT MALE

    Price $15.99

    Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"


    Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

     

    Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 
  • 12 Way Standard LED Circuit Blade Fuse Box

    12 Way Standard LED Circuit Screw Fuse Block

    Price $24.99

    12 Way Standard LED Circuit Screw Fuse Block

    This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.
  • RZR XP Turbo CNC Billet Radius Rods Raw Aluminum Finish

    XP Turbo CNC Billet Radius Rods

    Price $349.99

    Heavy Duty Radius Rod Kit for RZR XP Turbo (fits both 2 and 4 seat models)

    Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 5/8" chromoly heim joints. This setup is bulletproof. Available in raw or powdercoat finish.

    Be sure to specify your RZR year & desired finish before ordering!
  • 5 Switch Dash Panel Black
    • Out-of-Stock

    5 Switch Dash Panel Black

    Price $90.00

    5 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP 900. This panel allows you to add additional switches for lights and accessories. Made in the USA!