Home

Best sellers

Active filters

  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • 50 Caliber Racing Panhard Bar Fab Kit - Shown with optional high misalignment spacers

    Panhard Bar Fab Kit - 1/2" Chromoly Heim - 1" OD...

    Price $49.99

    Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 52mm Head Gasket kit for 52mm 110cc 125cc
    • On sale!
    • Out-of-Stock

    Gasket Head 52mm 110cc-125cc

    Price $10.00

    50 Caliber Racing 52mm Head Gasket Kit for 110cc and 125cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
  • 50 Caliber Racing Aftermarket tapered headset bearings
    • Out-of-Stock

    Honda 50 Improved Tapered Roller Headset Bearings

    Price $30.00

    Out of stock and discontinued

    Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
  • 88cc Race Head Big Bore Kit for honda Z50, xr crf 70, xr50, and crf 50's

    88cc Race Head Big Bore Kit for honda Z50, xr crf...

    Price $409.99

    88cc Race head kit for Your Honda 50 or Honda 70. This kit will drastically improve your overall performance on your bike. A stock honda 50 puts around 2.2hp to the ground and this kit will put you between 5.5-6hp to the ground and 30% more to the crank! Kit comes with fully assembled race head, performance cam, 20mm carburetor, and all the other goodies needed to fulfill your need for speed!
  • Weld In Bung - 1" ID Round Tube - 5/8-18 Threaded Through Right hand for custom rod ends fabricate tie rods, 4 link, etc

    Weld In Bung - 1.25" OD .120 Wall Tube - 5/8-18...

    50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through

    Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread. 

    Be sure to select thread direction and quantity before ordering!
  • 50 Caliber Koozie

    50 Caliber Koozie

    Price $3.00

    50 Caliber Racing Beer/soda Can Koozie


    - Keeps Hands Warm

    - Keeps Beers Cold

    - 2 Sided Print, 1 side 50 cal logo, other side slogan

    - Multiple designs to choose from
  • 3/4" Heim 1.75" OD Bung Panhard Bar Fab Kit - Shown with optional high misalignment spacers

    Panhard Bar Fab Kit - 3/4" Chromoly Heim - 1.75" OD...

    Price $69.99

    50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • performance part 7/8 blue Billet twist throttle

    Blue Billet Twist Throttle

    Price $29.99

    Blue 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
  • 15 tooth sprocket gear 420 chain 20mm shaft

    sprocket 420 15 tooth 20mm

    Price $15.00

    15 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes go karts and many other applications.
  • Rod End Kit - Single Joint - 7/8-14 x 7/8 bore Chromoly Heim - 1.75" OD Tubing - Shown With Optional Misalignment Spacers

    Single Joint Rod End - 7/8" Chromoly Heim - 1.75" OD...

    Price $42.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • Rod End Kit - Single Joint - 7/8-14 x 7/8 bore Chromoly Heim - 1.5" OD Tubing - Shown With Optional Misalignment Spacers

    Single Joint Rod End - 7/8" Chromoly Heim - 1.5" OD...

    Price $40.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • 3/4" Sway Bar Link Rod End Kit for 1.75" OD Tubing - Shown with Optional Misalignment Spacers

    Sway Bar Link Fab Kit - 3/4" Chromoly Heim - 1.75"...

    Price $119.99

    50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes two Left and two Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!