Home

Best sellers

Active filters

  • Availability: In stock
  • Categories: Automotive
  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Weld In Bung - 1" ID Round Tube - 5/8-18 Threaded Through Right hand for custom rod ends fabricate tie rods, 4 link, etc

    Weld In Bung - 1.25" OD .120 Wall Tube - 5/8-18...

    50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through

    Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread. 

    Be sure to select thread direction and quantity before ordering!
  • Illuminated On/Off Rocker Switch Rock Lights with Sexy Girl

    Illuminated On/Off Rocker Switch Rock Lights with...

    Price $21.99

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Sexy Girl

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!
  • 12 Way Fuse Block - Blade Terminals - LED Indicators

    12 Way Fuse Block - Blade Terminals - LED Indicators

    Price $24.99

    Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories

    Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
    Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
  • Wheel Spacer 6 x 135mm Ford F150

    Wheel Spacer 6 x 135mm - 14x2.0 Lugs

    Price $30.25

    50 Caliber Racing - 6 x 135mm  Wheel Spacer - Ford 6 Lug 1999-2014

    - Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths
    Price is for a single wheel spacer.

    Please choose size and quantity before ordering
  • 3/4" Heim 1.75" OD Bung Panhard Bar Fab Kit - Shown with optional high misalignment spacers

    Panhard Bar Fab Kit - 3/4" Chromoly Heim - 1.75" OD...

    Price $69.99

    50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 6 Way 12V Circuit Fuse Block with Ground Terminals
    • On sale!

    6 Way Screw 12V Fuse Block with Ground Terminals

    Price $25.99

    Universal 6 Way Covered 12V Screw Fuse Box Block with Ground Terminals

    Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
    Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
  • Illuminated Dual USB Rocker Switch

    Illuminated Dual USB Rocker Switch

    Price $16.50

    Illuminated 50 Caliber Racing Dual USB Rocker Switch - USB Type A

    High quality 50 Caliber Racing backlit dual USB rocker switch allows you to charge you iPod, cell phone and other mobile devices. Operates on 12-24 Volts and outputs 5V at 3.1 Amps. Waterproof, durable switches are perfect for your boat car truck sand rail or UTV!

    Be sure to select the correct color before ordering!
  • Wheel Spacer 5x150mm Toyota Sequoia and Tundra

    Wheel Spacer 5x150mm 14x150 stud

    Price $28.00

    50 Caliber Racing - 5x150mm Wheel Spacer

    - Will fit most vehicles with 5x150mm bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering
  • performance part 7/8 blue Billet twist throttle

    Blue Billet Twist Throttle

    Price $29.99

    Blue 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
  • 15 tooth sprocket gear 420 chain 20mm shaft

    sprocket 420 15 tooth 20mm

    Price $15.00

    15 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes go karts and many other applications.
  • 2pc LED Pod Lights

    2 inch LED Pod Lights

    Price $99.99

    2 inch LED Pod Lights

    50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury.
  • 4130 Chromoly Uniball Cup with Snap Ring for fabricating suspension parts

    Chromoly Uniball Cups with Snap Ring

    Price $25.99

    50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.

    Be sure to choose correct size before ordering!
  • Rod End Kit - Single Joint - 7/8-14 x 7/8 bore Chromoly Heim - 1.75" OD Tubing - Shown With Optional Misalignment Spacers

    Single Joint Rod End - 7/8" Chromoly Heim - 1.75" OD...

    Price $42.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • Rod End Kit - Single Joint - 7/8-14 x 7/8 bore Chromoly Heim - 1.5" OD Tubing - Shown With Optional Misalignment Spacers

    Single Joint Rod End - 7/8" Chromoly Heim - 1.5" OD...

    Price $40.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • Panhard Bar Fab Kit - Shown with Optional High Misalignment Spacers

    Panhard Bar Fab Kit - 5/8 Chromoly Heim - 1.25 OD...

    Price $54.99

    Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 12x1.25mm Extended Spike Lug Nuts - 60 Degree Taper Seat - 16 Pack for 4 Lug Vehicles - Green

    12x1.25mm Extended Spike Lug Nuts - 60 Degree Taper...

    Price $58.99

    Solid Steel Extended Spike Lug Nuts - 12x1.25mm Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 16, 20, and 24 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!