Active filters
50 Caliber Racing 52mm Gasket kit for 110cc and 125cc Lifan Engines Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes two Left and two Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
50 Caliber Racing Main Jet Kit for 20mm Performance Honda 50 Carburetor
Main jet kit designed to fit a 50 Caliber Racing 20mm performance carburetor (part #4211). This kit includes sizes: 82, 85, 87, 90, 92, & 95. The carburetor is equipped with an 89. Will also fit 20mm Keihin carburetors. Get your bike tuned to perfection with our high quality jet kit.
Carburetor 24mm Honda CB CL SL Models
With the 50 Caliber Racing 24mm Honda Carburetor you can upgrade your bike and you'll be back to riding in no time! This carburetor is for the1970s Vintage Honda Bikes but will also fit other bikes.
50 Caliber Racing Tall Seat for Honda XR50 & CRF50 Pit Bikes
Bolt on upgrade for your Honda 50. This seat will raise the seated position higher for taller riders or longer legs. The seats have a nice firmness to them and a mild grip cover. Comes complete with foam and cover.
Fits the following Honda pit bikes:
- Honda XR50 (1992-2003)
- Honda CRF50 (2004-2018)
Performance camshaft for Honda xr crf 50 or 70. Will fit 2000-present
Silver 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
Red Bolt Glue 250ml bottle high strength thread locking glue. This is a bolt glue by 50 Caliber Racing. Its purpose is to keep your nuts and bolts together! Its excellent for engines or any nuts and bolts that get vibration. If you are tired of nuts and bolts rattling lose this is your solution!
14 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. Bolt holes are 34mm eye to eye. This sprocket will fit atvs, pit bikes, and many other applications.
50 Caliber Racing 47mm Head Gasket Kit for 70cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look.
Be sure to choose kit size before ordering!
50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing KTM50 Junior Seat
Stock replacement for your KTM50. The seat has a nice firmness to it and a mild grip cover. Comes complete with foam and cover.
50 Caliber Racing Replacement Gas Tank for Honda XR70 & CRF70 Pit Bikes
Brand new gas tank for your Honda 70 pit bike. Includes cap and a new petcock valve. Don't waste your time messing around with gluing your cracked, leaking, dirty tank together. Just bolt a new one one, fill it up and ride!
