50 Caliber Racing 20 inch LED Curved (radius) Light Bar

Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Blow Me"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

HID Light Spot Beam 4" Black

Can-Am Maverick X3 Heavy Duty Tie Rod Kit (fits 2 & 4 seat models)

Custom tie rod kit. Machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated, teflon lined 4130 chromoly heim joints. These are the strongest rods you can get for your X3, they are practically bulletproof!

Be sure to select the correct size & finish before ordering!

- 12x8 Beadlock wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs

DISCONTINUED

50 Caliber Racing RZR Doors with Slam Latches - Black Panel with Black Frame

High quality front hinge doors for your RZR 570 800 and 900. Made from 6061 aluminum these doors are light weight and strong. They include reliable slam latches with capped nuts for added safety. These doors come fully assembled are easy to install and they open in the direction of a traditional car door.

50 Caliber Racing's Elite Series 4 Point Harness seat belt with black hardware and push button release

- Available in 2" and 3" wide straps- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many designs and colors available: Sugar skulls red and black, Bandana red, black, blue 

Available as harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

This 2 piece Dash Panel Kit will allow you to custom mount 2 switches on the dash panel of the Polaris RZR 170. Our 6061 Billet Aluminum CNC Dash Panels are machined here at 50 Caliber Racing and were designed to give your RZR that unique custom look!

- 12x6 Beadlock wheel
- 4x156mm pattern
- 4/2 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Accessories"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

Price is for 1 single wheel spacer

50 Caliber 2 inch wheel spacer 4x156mm with 12x1.5 studs

- 6061 Billet Aluminum
- 2 inch thick
- nuts to mount spacer to vehicle included
- Easy installation
- Fits Polaris 2013+ ranger, 2015 S900 and all xp1000's

- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs

DISCONTINUED

- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs

HID Euro 4" Black

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Brand new with 1 Year Warranty, 50 Caliber Racing Rear Brake Caliper assembly for the Yamaha Rhino YXR 700. Select to purchase Left, Right or both as a pair to replace the factory Rear Brake Caliper for your Rhino. They come fully assembled including Pads with mounting bracket as a complete and direct replacement for Part numbers: 5B4-2580V-00-00 and 5B4-2580W-00-00.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

 **DISCONTINUED**

RZR Max Flow Radiator Grill

- Fits RZR Xp 900 & 800 models
(doesnt fit all 800's. Make sure your front end matches the picture below)
- 20% more air to your radiator
- Matte Black Powder Coat Finish
- Steel construction
- Everything included for simple install
- FREE 50 Caliber Koozie with order!