Can-Am Maverick X3 Heavy Duty Tie Rod Kit (fits 2 & 4 seat models)

Custom tie rod kit. Machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated, teflon lined 4130 chromoly heim joints. These are the strongest rods you can get for your X3, they are practically bulletproof!

Be sure to select the correct size & finish before ordering!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Blow Me"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

- 12x8 Beadlock wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs

DISCONTINUED

50 Caliber Racing RZR Doors with Slam Latches - Black Panel with Black Frame

High quality front hinge doors for your RZR 570 800 and 900. Made from 6061 aluminum these doors are light weight and strong. They include reliable slam latches with capped nuts for added safety. These doors come fully assembled are easy to install and they open in the direction of a traditional car door.

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

This 2 piece Dash Panel Kit will allow you to custom mount 2 switches on the dash panel of the Polaris RZR 170. Our 6061 Billet Aluminum CNC Dash Panels are machined here at 50 Caliber Racing and were designed to give your RZR that unique custom look!

- 12x6 Beadlock wheel
- 4x156mm pattern
- 4/2 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs

Price is for 1 single wheel spacer

50 Caliber 2 inch wheel spacer 4x156mm with 12x1.5 studs

- 6061 Billet Aluminum
- 2 inch thick
- nuts to mount spacer to vehicle included
- Easy installation
- Fits Polaris 2013+ ranger, 2015 S900 and all xp1000's

- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs

DISCONTINUED

- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs

HID Euro 4" Black

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Left Hand Thread in 1/2" up to 7/8"

Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 

Brand new with 1 Year Warranty, 50 Caliber Racing Rear Brake Caliper assembly for the Yamaha Rhino YXR 700. Select to purchase Left, Right or both as a pair to replace the factory Rear Brake Caliper for your Rhino. They come fully assembled including Pads with mounting bracket as a complete and direct replacement for Part numbers: 5B4-2580V-00-00 and 5B4-2580W-00-00.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

 **DISCONTINUED**

RZR Max Flow Radiator Grill

- Fits RZR Xp 900 & 800 models
(doesnt fit all 800's. Make sure your front end matches the picture below)
- 20% more air to your radiator
- Matte Black Powder Coat Finish
- Steel construction
- Everything included for simple install
- FREE 50 Caliber Koozie with order!

Bolt-on Intrusion V Bar For Can-am X3, all models 2016+

Protect your passengers with our heavy duty welded steel bolt-on intrusion V-bar. Provides extra bracing and support for the weakest area of the stock cage. It also stiffens the chassis, providing rollover protection, and blocks large objects from entering through your windshield. 100% hand-built in the USA by 50 Caliber Racing.

Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Polaris RZR XP1000 Bump Seat with Harness

50 Caliber Racing Bump Seat for the Polaris RZR is the performance and safety upgrade you need that will add a 3rd seat perfect for kids 60 lbs or less! This seat is made to be mounted in the middle front between driver and passenger or in the back between the rear stock seats.