50 Caliber Racing Chrome 12 x 1.25mm Flat Base Lug Nuts for ATV / UTV wheels - Set of 16

- Kawasaki Teryx and Yamaha YXZ1000R - 12 x 1.25mm Thread Pitch - 17mm Hex - 32mm Length - 20mm Diameter Flange

 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Bolt on Billet Grab handle for roll cage or flat surface

**DISCONTINUED**

On/Off/On Rocker Switch-  50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Blow Me"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

50 Caliber Racing's 502 Machined Beadlock Wheels

- Available in 15x8 & 15x10
- True beadlock wheel
- 5/3 offset for 8" and 5/5 offset for 10"
- 6061 heat treated aluminum
- .190 thickness
- Machined billet Aluminum 3 piece wheel
- Double rolled inside lip for added strength
- Powder coat finish
- wheel weight 8" 20lbs, 10" 21lbs

Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.

50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

- 12x8 Beadlock Wheel
- 4x137mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs

50 Caliber Racing rod end fabrication kit. 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1.25" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Heavy Duty Rear Plate for Polaris RZR XP1000, Turbo and RS1

Toss your flexy, stamped stock rear plate and replace it with our heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your RZR, resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other exteme driving conditions. Available with no finsh (raw) or black powdercoat.

Be sure to select your RZR year and finish before ordering!

Universal 6 Way Covered 12V Circuit Ring Terminal Screw Fuse Box Block with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

Radius LED light bar mount system and 30" LED light bar COMBO for your Polaris RZR. Includes mount and light bar.

DISCONTINUED

Fits the following Polaris models:

- 2014 + up - XP 1000
- 2015 - Trail 900
- 2015 - High Performance S 900
- 2015 - Trail 900 XC

3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

This is the complete kit that includes all 3 panels and 4 additional rocker switches

- Fits all RZR models 570, 800, s, Xp 900
- Made from 1.5" steel tubing
- Protects your RZR while giving it a nice look!
- Powdercoat finish
- Everything included for simple install
- FREE 50 Caliber Koozie with order!

Quick Release Harness Mount

- Compatible with most 4-point, 5-point, and 6-point harnesses

- Durable construction for maximum strength and longevity

- Secure mounting to chassis or roll cage

- Optimized positioning for comfort and safety

- Lightweight design without compromising durability

- Easy installation with included hardware

- Ideal for racing, off-road, and performance street cars

- Single Pack Coverage: Includes 2 eyebolts, 2 nuts, and 2 clips—enough to mount either the top or bottom of one harness (purchase two packs for full installation).

Important: Will not work with sewn-together harnesses—ensure separate strap ends for proper attachment.

50 Caliber Racing Heavy Duty Radius Rod Kit for RZR Turbo S (fits both 2 and 4 seat models)

Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 5/8" chromoly heim joints. This setup is bulletproof. Available in raw or powdercoat finish.

Be sure to specify RZR year and finish before ordering!

8 Way Standard LED Circuit Blade Fuse Box

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.