Home

Best sellers

Active filters

  • Availability: Available
  • Categories: Automotive
  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • 88cc stage 1 big bore kit for honda for xr and crf 70

    88cc stage 1 big bore kit for honda for xr and crf 70

    Price $155.00

    Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years

    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (can still run pump gas)
    - Head gasket kit includes all gasket needed to install bore kit.
  • 12x7 Beadlock wheel 4x110mm pattern Powdercoat finish
    • On sale!

    12x7 Beadlock wheel 4x110 .190 4/3 black

    Price $99.00

    Looking for a strong, yet light weight wheel for your UTV? Well this is it! 50 Caliber Aluminum Racing wheel are a spun aluminum wheel with a double rolled edge on the inside of the wheel and a bead lock on the outside.

  • XP1000, Turbo & RS1 Heavy Duty Rear Plate Fits the new RS1 model!

    XP1000, Turbo & RS1 Heavy Duty Rear Plate

    Price $49.99

    Heavy Duty Rear Plate for Polaris RZR XP1000, Turbo and RS1

    Toss your flexy, stamped stock rear plate and replace it with our heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your RZR, resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other exteme driving conditions. Available with no finsh (raw) or black powdercoat.

    Be sure to select your RZR year and finish before ordering!
  • Wheel Spacer 8 x 6.5 Inch

    Wheel Spacer 8x6.5 Inch 9/16" studs

    Price $50.00

    50 Caliber Racing - 8x6.5 Inch (8 x 165.1 metric) Wheel Spacer

    - Will fit most vehicles with 8x6.5" bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering
  • Replacement Honda 50 Forks 92-Up CRF50 XR50 Gold Finish

    Replacement Honda 50 Forks 92-Up CRF50 XR50

    Price $69.99

    50 Caliber Racing Replacement Forks for Honda XR50 and CRF50 Pit Bikes - Stock Height

    One set of 50 Caliber Racing replacement forks. Stock height and spring rate. Available in original Gold finish for a clean, stock look. Fix your kids bike the easy way. Installation is quick and easy, and requires no modifications.
  • XP1000 6 Switch Dash Panel ONLY Orange

    XP1000 6 Switch Dash Panel (Only) Orange

    Price $159.99

    6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
  • RZR 800 Front Bumper

    Polaris RZR 570, 800, 900 Front Bumper

    Price $179.99

    - Fits all RZR models 570, 800, s, Xp 900
    - Made from 1.5" steel tubing
    - Protects your RZR while giving it a nice look!
    - Powdercoat finish
    - Everything included for simple install
    - FREE 50 Caliber Koozie with order!

  • 12x10 Beadlock wheel 4x110 .190 4/6 black
    • On sale!

    12x10 Beadlock wheel 4x110 .190 4/6 black

    Price $99.00

    - 12x10 Beadlock Wheel
    - 4x110mm pattern
    - 4/6 offset
    - 6061 heat treated aluminum
    - .190 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Powdercoat finish
    - Reinforcement ring on inside of rim
    - 12.5 lbs
  • 15x8 Beadlock wheel 4x156 .190 3/5 offset Black
    • On sale!

    502 Billet Aluminum Beadlock wheel Black

    Price $499.99

    50 Caliber Racing's 502 Machined Beadlock Wheels


    - Available in 15x8 & 15x10
    - True beadlock wheel
    - 5/3 offset for 8" and 5/5 offset for 10"
    - 6061 heat treated aluminum
    - .190 thickness
    - Machined billet Aluminum 3 piece wheel
    - Double rolled inside lip for added strength
    - Powder coat finish
    - wheel weight 8" 20lbs, 10" 21lbs
  • Illuminated On/Off Rocker Switch Rock Lights Jeep

    Illuminated On/Off Rocker Switch Rock Lights with Jeep

    Price $21.99

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Jeep

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!
  • Yamaha Viking Light Bar Brackets

    Yamaha Viking Light Bar Brackets

    Price $109.99

    50" LED Light Bar Mounting Brackets for Yamaha Viking

    Clamp on brackets allow you to brow mount a 50" Straight LED light bar on your Yamaha Viking. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.

     

    Patented Design
  • 20" Curved LED Light Bar - IP68 Waterproof Housing - 50 Caliber Racing

    Light Bar LED Radius (Curved) 20in

    Price $89.99

    50 Caliber Racing 20 inch LED Curved (radius) Light Bar

    Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

    - ATV and UTV
    - 4x4
    - Rock Crawling
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response
  • XP1000 6 Switch Dash Panel Red

    XP1000 6 Switch Dash Panel Red

    Price $179.99

    6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
  • 50 Cal's Yamaha Rhino 660cc Performance CDI box

    Yamaha Rhino Grizzly 660 CDI

    Price $119.99

    50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

    Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

     
  • Extended Forks - 2" Taller for Honda 50 92-Up CRF50 XR50

    Extended Forks - 2" Taller for Honda 50 92-Up CRF50...

    Price $119.99

    50 Caliber Racing Extended Forks - 2" Taller than stock for Honda XR50 and CRF50 Pit Bikes

    One set of 50 Caliber Racing extended forks. 2 Inches taller than stock height with stock spring rate. Black finish for a stealth, custom look. Fix your kids bike the easy way. Installation is quick and easy, and requires no modifications.
  • Off Road Childrens Booster Seat

    Off Road Child Booster Seat

    Price $239.99

    50 Caliber Racing Off Road Booster Seat with Harness Slot


    When you are out off roading with the family the safety of your children comes first. The last thing you want your child to be doing is to be bouncing around your adult size stock seat. This booster seat is secure and comfortable and it features suspension seat webbing, thick bolsters, & a 5th point harness slot to keep your child safe & snug in the seat. Price is for one seat. Harness sold separately.

     

    This item cannot ship to a PO Box
  • Can-Am Maverick X3 Heavy Duty Tie Rod Set

    Can-Am Maverick X3 Heavy Duty Tie Rod Set

    Price $234.99

    Can-Am Maverick X3 Heavy Duty Tie Rod Kit (fits 2 & 4 seat models)

    Custom tie rod kit. Machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated, teflon lined 4130 chromoly heim joints. These are the strongest rods you can get for your X3, they are practically bulletproof!

    Be sure to select the correct size & finish before ordering!