50 Caliber Racing Sale (8)

Best sellers

Grid
List

There are 20 products.

Sort by:

Showing 141-160 of 195 item(s)

- Out-of-Stock
Panhard Bar Fab Kit - 7/8" Chromoly Heim - 1.75" OD...

Price $82.99

Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Sway Bar Link Fab Kit - 7/8" Chromoly Heim - 1.5"...

Price $144.99

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
10 Way Screw Fuse Block - LED Indicators

Price $23.99

Universal 10 Way Covered 12V Circuit Ring Terminal Fuse Box Block with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
Carburetor 24mm Honda CB CL SL Models

Price $69.99

Carburetor 24mm Honda CB CL SL Models

With the 50 Caliber Racing 24mm Honda Carburetor you can upgrade your bike and you'll be back to riding in no time! This carburetor is for the1970s Vintage Honda Bikes but will also fit other bikes.
Carburetor 20mm Yamaha PW80 Pit Bike

Price $35.00

Replacement 20mm Carburetor for Yamaha PW80
Tie Rod End Kit Kawasaki KVF 750 Brute Force

Price $25.00

Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
- Out-of-Stock
Plastics, Seat and Gas Tank Kit Yamaha PW50

Price $0.00

Plastics, Seat and Gas Tank Kit Yamaha PW50
- Out-of-Stock
50 Caliber performance forks

Price $349.00

DISCONTINUED

These forks are oil filled and have 5 1/2 inches of travel. Forks come fully assembled. You can use your stock wheel and brake with these forks. Kit includes fork legs, tripples clamps, extended brake cable, and all hardware needed for installation. Fits crf and xr50s.

Click here for 2" Taller Forks we offer.
- Out-of-Stock
117cc stroker kit 6 for honda 50's and 70's

Price $569.00

This kit is the complete kit to convert your stock motor into a powerful open class 117cc engine!
Silver Billet Twist Throttle

Price $29.99

Silver 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
CDI 5 Pin Green Rev Box

Price $25.00

5 Pin CDI rev box
Fuel Line by the foot 3/16 ID - 3/8" OD

Price $6.00

Fuel Line by the Foot 3/16 ID - 3/8 inch OD
50cal bolt glue 50ml/thread locker

Price $15.00

50cal 271 High Strength RED Bolt Glue 50ml bottle high strength threadlocker. This is a bolt glue by 50 Caliber Racing. Its purpose is to keep your nuts and bolts together! Its excellent for engines or any nuts and bolts that get vibration. If you are tired of nuts and bolts rattling lose this is your solution!
Honda xr crf 50 rev box

Price $25.00

50 Caliber Rev Box. This rev box will remove the stock rev limiter and allow your pit bike to max out its performance and rpm's. Improved timing curve. Great bang for the buck! Fits all years of Honda xr50 and crf50
sprocket 428 15 tooth 20mm

Price $16.00

15 tooth sprocket made for a 428 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes buggy's go karts and many other applications.
Gasket kit complete 52mm 110cc - 125cc

Price $15.00

50 Caliber Racing 52mm Gasket kit for 110cc and 125cc Lifan Engines Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
Honda CT70 ATC70 Standard Bore 47mm Piston Kit

Price $45.99

50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.
Sway Bar Link Fab Kit - 3/4" Chromoly Heim - 1.5"...

Price $119.99

Rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single Joint Rod End - 3/4" Chromoly Heim - 1.5" OD...

Price $36.99

Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Single Joint Rod End - 1/2" Chromoly Heim - 1" OD...

Price $24.99

Single rod end kit including a 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for ATVs, Go Karts, Racing Lawn Mowers and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!