Active filters
Radius LED Light Bar Mounting Bracket COMBO for Polaris RZR XP1000 and S 900 - Includes mounting brackets and 40" Curved Light Bar
Fits the following Polaris models:
- XP 1000 (2014 - up)
- Trail 900 (2015 - up)
- High Performance S 900 (2015 - up)
- Trail 900 XC (2015 - up)
Yamaha Rhino 686cc Big Bore Kit 2004-2007 (top end cylinder kit)
Bolt on 102mm 686cc Big Bore Kit for all Yamaha Rhino Raptor and Grizzly 660 models. This is a complete bolt on kit with everything you need. Breathe new life into your Yamaha with our high quality, affordable and reliable big bore kit!
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Head Lights"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
50 Caliber Racing Seat Belt Bypass Override Plug for Polaris RZR and CAN-AM. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!
Complete 4 link fabrication kit with 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed specifically for 1" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing Chrome 12 x 1.25mm Flat Base Lug Nuts for ATV / UTV wheels - Set of 16
- Kawasaki Teryx and Yamaha YXZ1000R - 12 x 1.25mm Thread Pitch - 17mm Hex - 32mm Length - 20mm Diameter Flange
50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing Gas Tank for Yamaha PW80 Pit Bikes All Years
Bolt on Billet Grab handle for roll cage or flat surface
**DISCONTINUED**
Jet Kit for 20mm carb jets included 82/85/87/90/92/95
We now offer our own brand Jet Kit! Put the following reference number in the search bar: [4211A1]
Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.
Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
50 Caliber Racing Pit Bike 10 inch Rim for Honda CRF & XR 50
High quality 6061 Aluminum Pit Bike Rims with 28 spoke holes. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits Honda CRF and XR 50 motorcycles
50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly
Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine.
- 12x8 Beadlock Wheel
- 4x137mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs
Stock Replacement Handle Bars for Honda CT70 KO, Z50, K1 & k2 through 1978
50 Caliber Racing rod end fabrication kit. 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1.25" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Universal 6 Way Covered 12V Circuit Ring Terminal Screw Fuse Box Block with LED Indicators and Accessories
Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
Radius LED light bar mount system and 30" LED light bar COMBO for your Polaris RZR. Includes mount and light bar.
DISCONTINUED
Fits the following Polaris models:
- 2014 + up - XP 1000
- 2015 - Trail 900
- 2015 - High Performance S 900
- 2015 - Trail 900 XC
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels and 4 additional rocker switches
