Can-am X3 Shock Mount LED Light Bar Kit with 11" Elite Series LED Bar

A-Pillar Pod Light Mount Brackets for Polaris RZR 170

A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR 170. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black.

Available in brackets only or in a combo with 2 or 3" pod lights. Be sure to choose before ordering!

50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud

- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles

Price is for a single wheel spacer.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

DISCONTINUED

- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs

50 Caliber Racing Laser Cut Steel 3 Piece Grille Kit for 2022+ RZR PRO R & Turbo R 2 and 4 seat models

Add a unique honeycomb look to your RZR with our custom laser cut steel grille kit. This is a 3 piece design for the entire front end of the car, which transforms the look of your RZR drastically. Featuring a two tone powdercoat finish, this kit includes stainless steel fasteners. If you want to stand out from the crowd this is the grille for you. Available in  Red, White, or Clear over Raw with a Black accent panel.

Be sure to select color before ordering!

50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!

Custom Front Bumper for Polaris RZR XP1000 2019+, XP Turbo (does not fit Turbo S)

Protect your RZR with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabs for 11" Elite light bar, and CNC machined end caps.

Be sure to choose color before ordering!

50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through

Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread. 

Be sure to select thread direction and quantity before ordering!

Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat

Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more!  Available as roof rack only, or you can add light bar and pod lights for a complete system. 

Be sure to select lighting option before ordering!

Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

Roll Cage Harness Bar for 2016 Can-Am Commander 4 Seat UTV

Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount saftey harnesses on all 4 seats.

This fits the 2016 Commander models ONLY.

This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.

Wet Clutch Assembly for Yamaha Rhino and Grizzly 660

Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.

Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This price is for the bottom center piece only.

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This is for 1 bottom center plate only.

2 x 26x9x12 inch
2 x 26x11x12 inch

50 Caliber Racing 6 ply Radial off road racing tires. These tires are great for all terrains. 6 ply are extremely hard to blow out or punture. The non-directional pattern provides predictable cornering and claws up roots and rocks, creating optimum climbing confidence.

50 Caliber Racing Beer/soda Can Koozie

- Keeps Hands Warm

- Keeps Beers Cold

- 2 Sided Print, 1 side 50 cal logo, other side slogan

- Multiple designs to choose from

- 12x8 Beadlock wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 10.2 lbs

DISCONTINUED

50 Caliber Racing Tubular Front Bumper for Polaris RZR PRO XP,  Fits 2 & 4 Seater. Protect your RZR with our heavy duty tubular steel bumper. Fully welded construction. Durable powdercoat finish, tabs for a 6" light bar [5045B], and CNC machined end caps.

Be sure to choose color before ordering!