Bolt-on Intrusion V Bar For Can-am X3, all models 2016+

Protect your passengers with our heavy duty welded steel bolt-on intrusion V-bar. Provides extra bracing and support for the weakest area of the stock cage. It also stiffens the chassis, providing rollover protection, and blocks large objects from entering through your windshield. 100% hand-built in the USA by 50 Caliber Racing.

Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Polaris RZR XP1000 Bump Seat with Harness

50 Caliber Racing Bump Seat for the Polaris RZR is the performance and safety upgrade you need that will add a 3rd seat perfect for kids 60 lbs or less! This seat is made to be mounted in the middle front between driver and passenger or in the back between the rear stock seats.

50 Caliber Racing CNC Bullet Shifter Knob for Arctic Cat Wildcat

Give your Wildcat a unique look with our custom CNC milled shift knob with .50 Caliber Racing engraved. Designed to look like a .50 Caliber Bullet, each shifter handle is machined from solid billet aluminum for rugged looks and long lasting quality. Made in the USA.

50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 14mm Studs

- Will fit most 88 - Up GM vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

Wheel Spacers 4x110mm 12mm Stud for Yamaha YXZ1000R  2016-2018

4x110 bolt pattern with larger 12mm x 1.25mm studs to fit 2016-2018 Yamaha YXZ1000R UTVs!

- 6061 Billet Aluminum
- Self Centering design
- Bolt Pattern: 4 x 110mm
- 12x1.25mm studs, pre-installed
- Includes tapered lug nuts for mounting wheel to spacer
- Easy Installation
- Lifetime Warranty

Price is per spacer, Please choose QTY desired.

50 Caliber Racing Elite Series 6 inch Spot Beam 36 Watt LED Light Bar

You won't believe how much throw these lights have! 50 Caliber Racing Elite Series lighting with deep cone optics cranks out 2X the output of typical automotive LED light bars. These lights mean business!

- ATV and UTV
- 4x4 and Off Road
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This price is for the bottom center piece only.

- 12x8 Beadlock Wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs

DISCONTINUED

Can-am X3 Shock Mount LED Light Bar Kit with 11" Elite Series LED Bar

12 Way Standard LED Circuit Screw Fuse Block with Ground Terminals

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

A-Pillar Pod Light Mount Brackets for Polaris RZR 170

A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR 170. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black.

Available in brackets only or in a combo with 2 or 3" pod lights. Be sure to choose before ordering!

Custom CNC Billet Aluminum OR Black 4 Switch Dash Panel Only

Looking for a place to add dash switches to your car, truck, SUV, or Side by Side ? Our custom dash panel gives you 4 additional full size switch locations . Available with powder coat finish or raw aluminum. Made in the USA!

Billet Aluminum CNC Roll Cage/Bumper End Caps fits 1.75" tubing .095

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Accessories"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud

- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles

Price is for a single wheel spacer.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

DISCONTINUED

- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs

50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!