Active filters
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
**DISCONTINUED**
- 12x8 Beadlock wheel
- 4x115m pattern
- 4/4 offset
- 6061 heat treated aluminum
- ..190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 10.2 lbs
Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Lower Door Skin Inserts for Can-Am Maverick X3 2 Seater Models
Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your X3 a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using existing hardware and adding one extra bolt. For 2 seat models only.
50 Caliber Racing - 4 x 137 Wheel Spacer - 12x1.5mm Stud for Can-am X3 and Honda Talon. CNC wheel spacers offer wider stance for better stability and more tire clearance. 4x137 with 12x1.5mm studs will fit Can-Am X3 and Honda Talon. Includes lug nuts.
Please choose size and quantity before ordering. Price is for a single wheel spacer.
Discontinued
Radius LED light bar mount system for 2014-Up Can-Am Maverick / Commander
Fits the following Can Am models:
- Commander 800 STD, DPS and XT (2014-up)
- Commander 1000 STD, DPS, XT, XT-P, LTD (2014-up)
- Commander 1000 MAX (2014-up)
- Maverick 1000 STD, XRS, DPS, XMR (2014 - up)
- Maverick 1000 MAX (2014-up)
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Shocker"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
- Size: 8"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam - 18 LED bulbs 3 watt each 54 watts total
- Pivoting mounting system
- 5400 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!
- 12x8 Beadlock wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
DISCONTINUED
50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Be sure to choose bearing size before ordering!
4x156mm wheel spacer with 12mm x 1.25mm studs for Yamaha YXZ1000R 2019+. Need some more clearance or a wider stance for your Yamaha UTV? Precision CNC milled wheel spacers are what you need! Designed to fit 2019-up YXZ1000R models. Includes lug nuts. Price is for one wheel spacer
Please choose size and quantity before ordering
Single rod end kit including a 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for ATVs, Go Karts, Racing Lawn Mowers and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
This 2 piece Dash Panel Kit will allow you to custom mount 2 switches on the dash panel of the Polaris RZR 170. Our 6061 Billet Aluminum CNC Dash Panels are machined here at 50 Caliber Racing and were designed to give your RZR that unique custom look!
- 12x6 Beadlock wheel
- 4x156mm pattern
- 4/2 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs
**DISCONTINUED**
- 12x8 Beadlock wheel
- 4x137mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
DISCONTINUED
- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
