Best sellers
Active filters
-
-
sprocket 420 15 tooth 17mm
Price $15.0015 tooth sprocket fits a 420 chain and has a 17 mm inner shaft hole.
-
sprocket 420 15 tooth 20mm
Price $15.0015 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes go karts and many other applications.
-
2 inch LED Pod Lights
Price $99.992 inch LED Pod Lights
50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury. -
Chromoly Uniball Cups with Snap Ring
Price $25.9950 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering! -
Single Joint Rod End - 7/8" Chromoly Heim - 1.75" OD...
Price $42.99Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering! -
Single Joint Rod End - 7/8" Chromoly Heim - 1.5" OD...
Price $40.99Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering! -
Panhard Bar Fab Kit - 5/8 Chromoly Heim - 1.25 OD...
Price $54.99Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
OEM Polaris Belt 3211077 fit Polaris Scrambler,...
Price $94.99OEM Replacement Belt for your Scrambler, Hawkeye, Magnum, or Ranger. Best of the Best when it comes to a belt for your Polaris ATV!
NO LONGER SELLING THIS BELT.
-
12x1.25mm Extended Spike Lug Nuts - 60 Degree Taper...
Price $58.99Solid Steel Extended Spike Lug Nuts - 12x1.25mm Thread Size
Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 16, 20, and 24 lug nuts, with several colors to match any color scheme.
Be sure to select kit size and color before ordering! -
Illuminated On/Off Rocker Switch GPS
Price $0.00Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "GPS"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering! -
Illuminated On/Off Rocker Switch Bilge Pump
Price $0.00Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Bilge Pump"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering! -
Illuminated On/Off Rocker Switch LED Light Bar
Price $16.50Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "LED Light Bar"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering! -
Replacement Fork Yamaha PW80 Pit Bike
Price $79.99Replacement Front Forks for Yamaha PW80 Pit Bikes All Years
-
-
Extended Swing Arm - Silver
Price $179.99.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
-
Sprocket 420 13 tooth 20mm
Price $15.0013 tooth sprocket fits a 420 chain and has a 20 mm inner shaft hole.
-
Sprocket 420 13 tooth 17mm
Price $15.00Steel 13 tooth Sprocket for a 420 chain. The shaft opening size is a 17mm opening to the outside walls. Bolt holes are 34mm center to center. This sprocket will fit atv's, pit, bikes, motorcycles, quads, and many other applications.
-
PAIR of 50 Cal Spiral LED Lighted Whips with...
Price $210.00This pair of 50 Caliber Racing LED lighted whips are super bright and fully adjustable with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal Flag and swivel clip mounts. Available in 2, 4 and 6 foot lengths.
Be sure to choose length when ordering! -
Panhard Bar Fab Kit - 7/8" Chromoly Heim - 1.75" OD...
Price $82.99Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!