50 Caliber Racing Sale (9)

Best sellers

Grid
List

There are 20 products.

Sort by:

Showing 161-180 of 372 item(s)

- Out-of-Stock
Can-am X3 Lower Door Skin Inserts - 2 Seater Models

Price $135.00

Lower Door Skin Inserts for Can-Am Maverick X3 2 Seater Models

Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your X3 a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using existing hardware and adding one extra bolt. For 2 seat models only.
Polaris Scrambler 500 Rear Brake Caliper

Price $64.99

Polaris Scrambler 500 Rear Brake Caliper with Pads

50 Caliber Racing Rear Brake Caliper assembly for the 1998-2004 Polaris Scrambler 500 2x4, 4x4 ATV. It comes fully assembled including Pads to replace the factory Brake Caliper for your Scrambler with direct replacement for Polaris Part numbers listed.
- Out-of-Stock
Can-Am 2014 Roll Cage Light Bar Rack

Price $99.99

Discontinued

Radius LED light bar mount system for 2014-Up Can-Am Maverick / Commander

Fits the following Can Am models:

- Commander 800 STD, DPS and XT (2014-up)
- Commander 1000 STD, DPS, XT, XT-P, LTD (2014-up)
- Commander 1000 MAX (2014-up)
- Maverick 1000 STD, XRS, DPS, XMR (2014 - up)
- Maverick 1000 MAX (2014-up)
"Necessities" On/Off Rocker Switch Waterproof Sexy...

Price $21.99

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Necessities"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!
"Shocker" On/Off Rocker Switch Waterproof Sexy Design

Price $21.99

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Shocker"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!
- Out-of-Stock
Elite Series 9.5 inch LED Bar

Price $129.99

- Size: 8"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam - 18 LED bulbs 3 watt each 54 watts total
- Pivoting mounting system
- 5400 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!
- On sale!
12x8 Beadlock wheel 4x110 .190 4/4 polished

Price $99.00

- 12x8 Beadlock wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs

DISCONTINUED
- Out-of-Stock
2019+ YXZ1000R Wheel Spacer 4x156 - 12x1.25 Studs

Price $29.99

4x156mm wheel spacer with 12mm x 1.25mm studs for Yamaha YXZ1000R 2019+. Need some more clearance or a wider stance for your Yamaha UTV? Precision CNC milled wheel spacers are what you need! Designed to fit 2019-up YXZ1000R models. Includes lug nuts. Price is for one wheel spacer

Please choose size and quantity before ordering
2019+ RZR XP1000 & Turbo Front Bumper

Price $209.99

Custom Front Bumper for Polaris RZR XP1000 2019+, XP Turbo (does not fit Turbo S)

Protect your RZR with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabs for 11" Elite light bar, and CNC machined end caps.

Be sure to choose color before ordering!
Polaris RZR 170 2 Switch Dash Panel Kit

Price $69.99

This 2 piece Dash Panel Kit will allow you to custom mount 2 switches on the dash panel of the Polaris RZR 170. Our 6061 Billet Aluminum CNC Dash Panels are machined here at 50 Caliber Racing and were designed to give your RZR that unique custom look!
- On sale!
12x6 Beadlock wheel 4x156 .190 4/2 Black Powdercoat

Price $99.00

- 12x6 Beadlock wheel
- 4x156mm pattern
- 4/2 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs
CNC Roll Cage and Bumper Insert/End Caps 1.75"

Price $45.00

Billet Aluminum CNC Roll Cage/Bumper End Caps fits 1.75" tubing .095
Tie Rod End Kit Yamaha YFM350 ATV

Price $25.00

Tie Rod End Kit for Yamaha ATVs

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
Elite Series 6.5 Inch Spot Beam 36 Watt LED Light Bar

Price $84.99

50 Caliber Racing Elite Series 6 inch Spot Beam 36 Watt LED Light Bar

You won't believe how much throw these lights have! 50 Caliber Racing Elite Series lighting with deep cone optics cranks out 2X the output of typical automotive LED light bars. These lights mean business!

- ATV and UTV
- 4x4 and Off Road
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles
Carburetor 27mm Honda TRX 250

Price $40.00

Replacement 27mm Carburetor for Honda Fourtrax Recon TRX250
- On sale!
- Out-of-Stock
12x8 Beadlock wheel 4x137mm .190 4/4 polished

Price $99.00

**DISCONTINUED**

- 12x8 Beadlock wheel
- 4x137mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
- On sale!
12x10 Beadlock 4x115 .190 4/6 powdercoat

Price $99.00

- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
- On sale!
12x10 Beadlock wheel 4x115 .190 4/6 polished

Price $99.00

DISCONTINUED

- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs
HID Light 4" Euro Beam Black

Price $49.99

HID Euro 4" Black
Billet Rear Grille Bezels Can Am X3 2 and 4 seat models

Price $129.99

Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.

Be sure to select color before ordering!