50 Caliber Racing 2" 4 Point Safety Harness

- 2" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- Available in 4 and 5 Point (antisubmarine strap)
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green and Purple

Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs.

50 Caliber Racing 4 Point Harness with black hardware and push button release

- Available in 2" and 3" wide straps
- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green, Purple, Yellow, and Camo

Available as Racing harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.

50 Caliber Racing 3" 4 Point Safety Harness

- 3" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- Available in 4 and 5 Point (antisubmarine strap)
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green and Purple

Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs.

50 Caliber Racing 3" 5 Point Harness Racing Harness

- 3" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- 5 Point - Includes crotch strap

Available as Racing harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. 

50 Caliber Racing 2" 5 Point Safety Harness

- 2" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- 5 Point - Includes crotch strap

Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs.

Honda Rancher TRX350 Top End Cylinder Kit 2000-2006
DISCONTINUED
Complete top end rebuild kit for your Honda Rancher TRX350! Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.

12 Way Standard LED Circuit Screw Fuse Block

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

50 Caliber Racing's Elite Series 4 Point Harness with Ultra Kush Padding for maximum comfort

- Available in 2" and 3" wide straps- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many designs and colors available: Sugar skulls red and black, Bandana red, black, blue 

Available as Racing harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.

Brand new with 1 Year Warranty, 50 Caliber Racing single piston Rear Brake Caliper assembly for your Honda ATV. Includes billet parking brake block off plate which is removeable in order to maintain the use of your existing parking brake. Comes with new Pads plus assembly hardware shown, however the bracket is not included so you're required to use your current caliper mounting brackets with this Caliper.

50 Caliber Racing 12V Wire Harness Kit with Relay and Switch

Universal 12 Volt wire harness kit complete with 40 amp relay, fuse and On/Off switch. This kit will allow you to safely connect a LED Light Bar, Fog Light, Lighted Whip, Pod Lights, or any other 12 volt accessories to your vehicle.

6 Way Standard LED Circuit Blade Fuse Box aka Power block

This power block is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Vintage Stage 1 88cc Big Bore kit (52mm bore)

- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.

 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

Universal 6 Way Covered 12V Circuit Ring Terminal Screw Fuse Box Block with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

Carburetor for Suzuki LT80 Quadsport ATV

50 Caliber Racing Carburetor for the Suzuki Quadsport LT80. Why bother with trying to rebuild your old Carb when you could buy a replacement to upgrade your ATV saving you time and money... you'll be back to riding in no time!

8 Way Standard LED Circuit Blade Fuse Box

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Polaris Scrambler 500 Rear Brake Caliper with Pads

50 Caliber Racing Rear Brake Caliper assembly for the 1998-2004 Polaris Scrambler 500 2x4, 4x4 ATV. It comes fully assembled including Pads to replace the factory Brake Caliper for your Scrambler with direct replacement for Polaris Part numbers listed.

Quick Release Harness Mount

- Compatible with most 4-point, 5-point, and 6-point harnesses

- Durable construction for maximum strength and longevity

- Secure mounting to chassis or roll cage

- Optimized positioning for comfort and safety

- Lightweight design without compromising durability

- Easy installation with included hardware

- Ideal for racing, off-road, and performance street cars

- Single Pack Coverage: Includes 2 eyebolts, 2 nuts, and 2 clips—enough to mount either the top or bottom of one harness (purchase two packs for full installation).

Important: Will not work with sewn-together harnesses—ensure separate strap ends for proper attachment.

Tie Rod End Kit for Yamaha ATVs

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.